Sachse electronic ignition

AshishNJ · Post by **AshishNJ** » Tue Sep 24, 2019 2:08 pm

I was looking at this system https://www.elektronik-sachse.de/shopsy ... x1000.html and wondering if anyone has used it . Since it is for a custom setup, I am thinking of also using the M Unit and cut down on wiring ..

Rubberduk · Post by **Rubberduk** » Tue May 05, 2020 5:40 pm

Hi AshishNJ, I have this system installed and it is excellent, easy install and set up, and has been totally reliable,
Best regards

Larry Zimmer · Post by **Larry Zimmer** » Wed May 06, 2020 10:57 am

Thanks for the input, guys!

AshishNJ · Post by **AshishNJ** » Thu May 07, 2020 8:14 pm

I actually installed it yesterday. Install is a breeze . I was only able to test run it and make sure my 40 yr old coils are still good

.
I won’t be able to test run engine since bike is in pieces. But the bench test was good .

NobleHops · Post by **NobleHops** » Sun May 10, 2020 7:48 pm

Does this use the stock advancer? What resistance does it want for coils?

NobleHops · Post by **NobleHops** » Sun May 10, 2020 7:50 pm

Is this the one you’re using?

https://www.elektronik-sachse.de/shopsy ... x1000.html

AshishNJ · Post by **AshishNJ** » Mon May 11, 2020 8:15 am

Nils. That is the one. It only uses the stock advancer base . No spring or cams are used and it uses coils with any resistance between 2-5 ohms.

I have absolutely no issues with sparks

AshishNJ · Post by **AshishNJ** » Mon May 11, 2020 8:16 am

You don’t need any of that in picture #2

NobleHops · Post by **NobleHops** » Mon May 11, 2020 11:44 pm

Ashish, where did you mount the box? USB interface for programming? Did they supply some starter maps?

AshishNJ · Post by **AshishNJ** » Tue May 12, 2020 10:56 am

There is no usb with it. It comes with 9 curves and you can choose one As per your liking by a rotary switch

AshishNJ · Post by **AshishNJ** » Tue May 12, 2020 11:00 am

Curves are on their documentation

https://www.elektronik-sachse.de/manuals/Z66-en.pdf

Larry Zimmer · Post by **Larry Zimmer** » Tue May 12, 2020 12:13 pm

DAMN! That appears to me to be quite a system. And, for the money, definitely to be considered if replacing OEM. Assuming their accuracy of the pick-up locations is precise (120 degree) it sounds like 'the one'! Unless you just ''have to have' customise-able curves.

AshishNJ · Post by **AshishNJ** » Tue May 12, 2020 2:19 pm

For someone like me, choice of 9 timing curves is more than adequate. May not do that well with some pro . They do offer custom settings if someone wants it . For me, keeping my el-cheapo coils and getting rid of all that mechanical mess is worth it.

Btw, in test mode , I could see Solid spark from 3/4” away from ground

Jeff Bennetts · Post by **Jeff Bennetts** » Tue May 12, 2020 7:51 pm

I like the simplicity of it!

AshishNJ · Post by **AshishNJ** » Thu Jun 18, 2020 1:50 pm

Engine came to life :) . I am complete noob when it comes to electronics. So joyed when I heard those engines fire.
Shared on FB but it is important I share it here as well.

https://m.youtube.com/watch?v=unHpIedvnJo

I am a big fan of forums. Unfortunate fb is killing them

The International CBX Owners Association

Sachse electronic ignition

Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition

Re: Sachse electronic ignition