Have 81 CBX with single swingarm that does kit allow me to keep the filter box. Airbox is attached to carbs and there is a conical K&N attached to airbox. Wondering if I would be ok with stock jetting or I should replace them ?
Currently carbs are out so would be easier to swap jets if needed
81 CBX with airbox and k&n
-
AshishNJ
- Power Poster
- Posts: 389
- Joined: Mon Mar 25, 2019 10:26 am
- Location: NJ USA
- Location: NJ USA
81 CBX with airbox and k&n
1979 CBX (faster Red)
1981 CBX Streetfighter
2017 Aprilia Tuono.
Past rides : FZ1, BMWS100rr,S1000r,k1300S,YAMA RD350,Enfield 350
1981 CBX Streetfighter
2017 Aprilia Tuono.
Past rides : FZ1, BMWS100rr,S1000r,k1300S,YAMA RD350,Enfield 350
-
steve murdoch icoa #5322
- ICOA Member
- Posts: 3932
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: 81 CBX with airbox and k&n
Always had a slight stumble around 4500 rpm with the single K&N. Didn't matter which exhaust was on the bike.
Went away with the stock air setup.
Went away with the stock air setup.