Hi CBXers,
If anyone has the EBC front rotors on their 79, could you measure the thickness of the center hub? I ordered a set, but when I got them, the hubs were much thicker than the stock ones, the bolts were not long enough to go all the way through and still have any thread left to screw on the nuts. Anyone else had any issues with these working? Thanks
Brett
EBC front rotors
-
Bamacbx
- ICOA Member
- Posts: 1
- Joined: Sat Jun 09, 2012 10:40 am
- Location: Prattville AL
- Location: Prattville AL
-
steve murdoch icoa #5322
- ICOA Member
- Posts: 3931
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: EBC front rotors
Welcome to the site, Brett.
Never heard of that problem with the EBC rotors.
I remember zxbob used them on his '80 resto and did not mention that particular problem.
It is a long thread but some good info.
viewtopic.php?f=6&t=6218&p=48133&hilit= ... ors#p48133
Never heard of that problem with the EBC rotors.
I remember zxbob used them on his '80 resto and did not mention that particular problem.
It is a long thread but some good info.
viewtopic.php?f=6&t=6218&p=48133&hilit= ... ors#p48133