BLACK FASTENERS

twinegar · Post by **twinegar** » Thu Sep 17, 2009 9:39 pm

Is there a way to turn steel bolts back to black without painting.

alimey4u2 · Post by **alimey4u2** » Fri Sep 18, 2009 5:37 pm

Black chrome plating....

ericfreeman · Post by **ericfreeman** » Fri Sep 18, 2009 7:52 pm

I use a Sharpie to keep things looking black.

Eric

twinegar · Post by **twinegar** » Fri Sep 18, 2009 8:46 pm

I was hoping that there was a way to anodize steel at home but I guess not. Has anyone tried epoxy paint or does it come loose from the metal like regular paint? I guess powder coating might be an option but only if I can do it at home somehow or maybe just buy new ones from BikeBandit.

alimey4u2 · Post by **alimey4u2** » Sat Sep 19, 2009 3:31 am

Trouble with epoxy or powder is that the layer is quite thick making the bolt oversized.... There must be an economical plating method but as of yet I haven't found it...

CBXRoger · Post by **CBXRoger** » Sat Sep 19, 2009 3:44 am

I used some 'cold bluing' solution to cover steel parts on a gun many years ago. With enough coats, it will be almost black.

alimey4u2 · Post by **alimey4u2** » Sat Sep 19, 2009 3:53 am

CBXRoger wrote:I used some 'cold bluing' solution to cover steel parts on a gun many years ago. With enough coats, it will be almost black.

Brilliant....

cbx6ss · Post by **cbx6ss** » Sat Sep 19, 2009 5:23 am

Have you tried searchng the web for "anodize"? I thought I recall seeing a place that sells kits for same.
/r
Brad

EMS · Post by **EMS** » Sat Sep 19, 2009 10:42 am

"Anodizing" is a process for aluminum. I have not seen the term used in reference to treating steel or other ferrous surfaces.
The common misconception is also that "anodizing" is a plating process. It is not. It is a process that uses oxydizing of the material to produce a certain surface.
It may be easiest to buy black steel fasteners.

Phil · Post by **Phil** » Sat Sep 19, 2009 8:20 pm

Cadmium with a black chromate. Caswells has do it your self kits , never tried one so can`t say how well they work.

Rick Pope · Post by **Rick Pope** » Sun Sep 20, 2009 2:19 pm

I may be way off base here, but I know that the antique guys talk about Parkerizing fasteners. Is this like anodizing for steel? Is it black?

CBXRoger · Post by **CBXRoger** » Sun Sep 20, 2009 3:55 pm

If you look up Parkerizing and cold bluing on the Internet, you will find information about coating steel and making it black. Parkerizing used to create a sort of green color. I am sure you will find something that you can use to blacken your steel bolt heads.

Don · Post by **Don** » Sun Sep 20, 2009 4:50 pm

This should fit the bill

http://www.brownells.com/.aspx/pid=1150 ... GUN_FINISH

Unlike powdercoat, it's microscopically thin, you can do it at home in your own oven and it won't flake off

Don

The International CBX Owners Association

BLACK FASTENERS

BLACK FASTENERS

Bluing for guns

Re: Bluing for guns

"a way to anodize steel at home"