spark units disconected
-
ray bear
- New Member & Happy To Be Here
- Posts: 15
- Joined: Wed Jun 13, 2012 5:38 am
- Location: Mclaren Vale
- Location: McLaren Vale, Australia
spark units disconected
Hi everyone, I have been a member for a while and had my 79 for some time but this is my first post.I have noticed the wiring plug from the spark units has been unplugged and the black with white wire from the spark unit has been continued up to one coil, can some one advise me as to what modification has been done here, my bike goes well Thanks Bill
-
steve murdoch icoa #5322
- ICOA Member
- Posts: 3931
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: spark units disconected
Welcome to the site, Bill.
You probably have a Dyna igniton system installed. It eliminates/bypasses the need for the stock spark units.
There are a couple pics here.
viewtopic.php?f=21&t=7226
You probably have a Dyna igniton system installed. It eliminates/bypasses the need for the stock spark units.
There are a couple pics here.
viewtopic.php?f=21&t=7226
-
daves79x
- ICOA Technical Director
- Posts: 4766
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: spark units disconected
Welcome! Also pretty sure you have a Dyna ignition. Look under the pulser cover to make sure, but the wiring mods you describe fit. To see details of the Dyna wiring, go to TIMS CBX website and you'll find good instructions for Dyna wiring.
Dave
Dave