Page 1 of 1
decal source
Posted: Mon Dec 27, 2010 7:14 pm
by barryadam
I think CB Decals / AFE Graphics is still Mark Olan, right? Formerly of Mach9 Technologies?
Is CB/AFE the same product as reprodecals (reproductiondecals.com) on fleaBay?
They are all in Ontario, Canada.
Barry
Re: decal source
Posted: Mon Dec 27, 2010 8:53 pm
by steve murdoch icoa #5322
They are two seperate companies, Barry.
Over the years i have purchased 3 complete sets from Andre at Reproduction Decals in London, Ontario and have been very pleased with them.
You will have to e-mail them and they will send you their Honda catalogue. The mother company flexed their muscles a couple years ago telling Andre he could no longer advertise Honda products. Bastards!
http://www.reproductiondecals.com/defau ... .html~main
Re: decal source
Posted: Wed Dec 29, 2010 9:40 am
by barryadam
Thanks for explaining it, Steve.
Yeah, the missing H page on reprodecals site is conspicuous by it's absence.
From my searches, CB / AFE seem to come highly recommended for the CBX, but reprodecals are always on sale on the Bay.
Barry
Re: decal source
Posted: Sun Jan 09, 2011 10:53 pm
by pitfighter
Hi,
Other than Ebay;
Anyone have a source for a pair of the "HONDA" name tank "decals" (not sure they are really decals in the strict sense of the word,) for a 1979 model.
Finally got back into this project again and buying parts like crazy - I was bidding on a pair on Ebay, but thought I'd check here before I got into a real bidding war.
Thanks - JJ
Re: decal source
Posted: Mon Jan 10, 2011 1:29 am
by barryadam
On the tank, the "HONDA" is a badge held on by fasteners.
If you are after the tank decals, they include the "SuperSport" under the badges, as well as the "CBX" and "Double Overhead Cam 24 valves" on the top, and the stripes.
If you need the tank decals, minus the stripes, I have some extras. No extra (steenkin') badges though.
Barry
Re: decal source
Posted: Tue Jan 11, 2011 2:41 am
by pitfighter
That is extremely kind of you, barry,
But unfortunately it is the Honda badges I am looking for.
Cheers,
Jesse.
Re: decal source
Posted: Tue Jan 11, 2011 7:42 am
by EMS
Have you checked with Honda?
Re: decal source
Posted: Tue Jan 11, 2011 11:44 pm
by pitfighter
Thank you EMS, they have them at Honda, good call and the little screws to hold them in place.
http://www.hondapartshouse.com/honda-pa ... QhfGFv1w==
JJ
Re: decal source
Posted: Wed Jan 12, 2011 5:40 pm
by daves79x
Just make sure you have a '79 tank with the 3mm screws - the '80 tanks had 4mm ones. The badges were a 469 part # for the '80 also, with minor background differences and the 4mm holes, but they have been NLA for a long time. Guys just drill the '79 ones and use them.
Dave
Re: decal source
Posted: Thu Jan 13, 2011 2:15 am
by pitfighter
Good call, thank you.
It is a 79 tank for sure.
JJ