The International CBX Owners Association

Gang,

I have misplaced the bolts for my engine protection bars, and I'm unsure of what I need, nor can I find any clues on the parts fiches.



I need the whole set, the two that bolt to the front motor mount, the two that join the sections together, and the two that pass through the bosses on the front of the engine. And is there a bushing used at the front of the engine, or do these just pass through without?

Does anyone have a set they can measure for me, or sell to me for that matter? Please note the grade of the bolts if it's visible when you look.

TIA,

N.

Nils:
Your photo shows the factory hardware - it's rather pedestrian looking stuff. Not up to the usual Honda standard. I've found nothing from Honda that matches up exactly if you can't find the original stuff. The engine mounts don't use bushings - just bolt straight up. You could get stainless hardware or chrome from many bolt suppliers to work.

Dave

Dave, I think the pic predates Nils 'misplacing' the bolts he now needs.

TerryL wrote:Dave, I think the pic predates Nils 'misplacing' the bolts he now needs.

Ya, I'm off to my local industrial supply place, bars in hand, and I'll find some good stainless that fit, shouldn't be tough. The only one I'd like to get OEM really is that top one with the flange. I'll figger it out :)

N.