Hello everyone,
I'm rebuilding the brakes on my 79 CBX and I had a question regarding the spring that puts pressure down on the brake pads. The tab on the top of the spring for the rear caliper is broken off. I don't have them in front of me, but I believe the two springs for the front calipers are in a similar condition. My question is, can I get away with using them like this or better yet, is there anywhere where I can find replacements? I can't seem to find them anywhere.
The part numbers are
45108-410-006 for the rear and
45108-415-006 for the front
Thank you
Rear Caliper Pad Spring
-
- Forum Regular
- Posts: 35
- Joined: Sat Jul 23, 2022 4:30 pm
- Location: Oregon
- Location: Oregon
-
- ICOA Technical Director
- Posts: 4762
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Rear Caliper Pad Spring
For parts like that, Louis @ usedcbxparts.com is your guy. I understand he is away for a bit but he'll fix you right up. There are lots of others here that likely have one kicking around too, see what shakes out.
Dave
Dave