Page 1 of 1
Alternator and oil pressure switch 'boot'
Posted: Sun Feb 05, 2017 11:59 am
by CBX1000chris
Apologies for subject description and if this has been covered before sorry too, I did search for them! I'm working through my bike and the boot for the cables that exit the alternator is badly cracked. Looking at the parts diagram I think this boot is part of the alternator harness. Also, the cover over the oil pressure switch is cracked and appears to be part of the sub-harness. Does anyone know of a source for these or suitable alternatives?
Thanks in advance,
Chris.
Re: Alternator and oil pressure switch 'boot'
Posted: Sun Feb 05, 2017 12:48 pm
by jnnngs
Re: Alternator and oil pressure switch 'boot'
Posted: Sun Feb 05, 2017 3:07 pm
by jt
Tims also has them. Scroll to bottom of page.
http://www.timscbx.com/
Re: Alternator and oil pressure switch 'boot'
Posted: Mon Feb 06, 2017 8:21 am
by daves79x
TIMS has them for sure. The oil pressure boot is easy to replace, but the alternator one is a real pain. You have to remove all wires from the connector, then fish one at a time through the new rubber. You'll be cussing by the 3rd or 4th wire.
Dave
Re: Alternator and oil pressure switch 'boot'
Posted: Tue Feb 07, 2017 7:09 am
by CBX1000chris
Thank you for the replies, just what I needed

)
Re: Alternator and oil pressure switch 'boot'
Posted: Wed Feb 08, 2017 10:44 am
by cbx1956
Been out of stock for ages & doesn't know when he'll get again. I checked
Re: Alternator and oil pressure switch 'boot'
Posted: Wed Feb 08, 2017 3:54 pm
by NobleHops
Just bought two from Louis.