Page 4 of 4

Re: Carb Jetting Guidence

Posted: Tue Oct 11, 2022 12:55 pm
by jt
bobcat wrote: Tue Oct 11, 2022 12:51 am Well, that sounds a lot better ! It's not popping on deceleration that bad.
If you can do another video with more than one burst through the rpm range
in different gears (without getting in trouble), it would be easier to tell more
about it.
Maybe just go one and a half turns out on 1and 6 screws and one and a quarter
on the rest.

And yes, thanks Nils !
Ok will do but will be a bit before I can do that have a few other things to do.
JT