Fork Tube Interchangeability

Locked
User avatar
twinegar
Power Poster
Power Poster
Posts: 482
Joined: Sat Oct 13, 2007 6:10 pm
Location: Midwest
Location: Kansas City, Kansas, USA
Contact:

Fork Tube Interchangeability

Post by twinegar »

Will 79 fork tubes work with the 80 lowers? The 80 tubes were pitted and the ones I received are off a 79 even though I asked for 80 so will the air component still work. I am getting a little tired of asking for a part and receiving another especially when it costs a lot to return it. I guess some people don't understand the word, "restoration".
http://www.spookytoms.com/SpookyTom-MTRCCLSTF.html

"66CL160, 68CL125A, 68CL450, 69CL125A, 69CB750, 71CB450, 71CB500, 71CB750, 72CB350F, 72CB750, 74CB750, 75CL360, 75CB550, 75CB750, 76CB750, 79CB750, 79CBX, 79CBX, 80CBX, 82CB750, 84VF700S 05HDSPORTSTER1200ROADSTER"

ericfreeman
Forum Regular
Forum Regular
Posts: 186
Joined: Sun May 10, 2009 12:45 am
Location: Point Roberts, WA
Location: Point Roberts, Washington, USA

Post by ericfreeman »

Can't answer your question but I know your frustration with parts. My '79 had badly rusted tubes and I located a set of used forks from a motorcycle salvage place in the Midwest. Got the forks and found both of them obviously bent: all they had to do was look down the tubes to see the damage. Cost me $30 in shipping to return them for a refund but was never compensated for the shipping. Gets really frustrating sometimes!!

Eric

User avatar
cbxtacy
Posting God
Posting God
Posts: 2543
Joined: Sun Aug 29, 2004 4:22 am
Location: San Diego, California, USA
Location: San Diego, California, USA

Post by cbxtacy »

I don't know if the 79 tubes will work but I've been getting new tubes from these people http://www.frankmain.qpg.com/ for years. I have a set of their tubes in my Turbo and in my wire wheeled CBX which I roadraced for years. Never any problem.
one out of four people in this country is mentally unbalanced
think of your three closest friends, if they're okay then
YOU'RE THE ONE

User avatar
alimey4u2
ICOA Web Video Director
ICOA Web Video Director
Posts: 5093
Joined: Fri Aug 11, 2006 1:03 pm
Location: Uphill, WsM, United Kingdom

Post by alimey4u2 »

79 & 80 fork tubes are different...80 Has a lower slider bushing.. Fork lowers have different part numbers.
ICOA # 656

User avatar
twinegar
Power Poster
Power Poster
Posts: 482
Joined: Sat Oct 13, 2007 6:10 pm
Location: Midwest
Location: Kansas City, Kansas, USA
Contact:

Post by twinegar »

....but will they hold air? The guy assures me that the 79 tubes work in the 80 lowers but didn't mention the air. I looked over the parts blow-up of both and it appears that the forks are naturally designed to maintain an air-tight seal.

See what happens when a seller ignores your specifically stated part needs and sends you the wrong part? I specifically asked for 80 uppers and mentioned the pain of returning parts. If this was an Ebay sale I would file with Paypal for a refund plus return shipping and after receiving the $$$ leave a negative feedback.
http://www.spookytoms.com/SpookyTom-MTRCCLSTF.html

"66CL160, 68CL125A, 68CL450, 69CL125A, 69CB750, 71CB450, 71CB500, 71CB750, 72CB350F, 72CB750, 74CB750, 75CL360, 75CB550, 75CB750, 76CB750, 79CB750, 79CBX, 79CBX, 80CBX, 82CB750, 84VF700S 05HDSPORTSTER1200ROADSTER"

User avatar
alimey4u2
ICOA Web Video Director
ICOA Web Video Director
Posts: 5093
Joined: Fri Aug 11, 2006 1:03 pm
Location: Uphill, WsM, United Kingdom

Post by alimey4u2 »

"If" they fit, with the 1980 top air collars they will not leak air... :wink:
ICOA # 656

daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4832
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Post by daves79x »

No - they will not work. The fork tube has to have the bushing installed to fit in the '80 fork lowers and the '79 tubes have no provision for that. Sure, they will bolt in, but will be a very sloppy fit due to lack of a bushing on the '79 tubes. '80 tubes are a bit hard to come by. I have 2 complete '80 front ends that are in good shape, but I won't separate the parts. Let me know if you are interested.

Dave

User avatar
twinegar
Power Poster
Power Poster
Posts: 482
Joined: Sat Oct 13, 2007 6:10 pm
Location: Midwest
Location: Kansas City, Kansas, USA
Contact:

Post by twinegar »

Well, it looks like I will have to use the whole 79 forks and stick the air valve in the top as much as I hate to do it and wait for 80 tubes to turn up.
http://www.spookytoms.com/SpookyTom-MTRCCLSTF.html

"66CL160, 68CL125A, 68CL450, 69CL125A, 69CB750, 71CB450, 71CB500, 71CB750, 72CB350F, 72CB750, 74CB750, 75CL360, 75CB550, 75CB750, 76CB750, 79CB750, 79CBX, 79CBX, 80CBX, 82CB750, 84VF700S 05HDSPORTSTER1200ROADSTER"

User avatar
cbxtacy
Posting God
Posting God
Posts: 2543
Joined: Sun Aug 29, 2004 4:22 am
Location: San Diego, California, USA
Location: San Diego, California, USA

Post by cbxtacy »

The link I posted earlier can make '80 CBX tubes and he is aware of the differences. A pair of tubes is usually around $250.
one out of four people in this country is mentally unbalanced
think of your three closest friends, if they're okay then
YOU'RE THE ONE

User avatar
FalldownPhil
ICOA Member
ICOA Member
Posts: 930
Joined: Fri Feb 10, 2006 11:25 pm
Location: Marina Del Rey, CA. USA
Contact:

Post by FalldownPhil »

twinegar,
I have a pair of '80 PT# 51410-469-013 "pipe frt. fork" NOS still in their original boxes from mother Honda. Email me if interested.
Very Best,
Phil
When you are up to your ass in alligators it is sometimes difficult
to remember that your objective was to drain the swamp !!

User avatar
Don
Amazing Poster
Amazing Poster
Posts: 806
Joined: Wed Apr 02, 2003 3:13 pm
Location: Biloxi, Mississippi, USA
Location: Biloxi, Mississippi, USA

Post by Don »

twinegar wrote:Well, it looks like I will have to use the whole 79 forks and stick the air valve in the top as much as I hate to do it and wait for 80 tubes to turn up.
If you're not concerned with keeping it 100% stock, why not just do the obvious and upgrade the front end to ProLink forks? Major improvement (which is why Dave has a couple of complete '80 front ends laying around ;) ) and then you could also upgrade the front brakes to 1100F calipers as well?

Don

User avatar
twinegar
Power Poster
Power Poster
Posts: 482
Joined: Sat Oct 13, 2007 6:10 pm
Location: Midwest
Location: Kansas City, Kansas, USA
Contact:

Post by twinegar »

Call me Mr. OEM, all of my bikes are either factory original or are on their way to it. I am compelled to return them. I am making on exception by replacing the tail piece / grab rail unit on my 79 with a 80 unit so I will have the storage compartment but I can return to original easy enough. Thanks to everyone for the suggestions and offers as I proceed into the abyss. I save all of these good ideas to fall back on in case I decide to customize my second 79. I am embarrassed to admit that prior to 2007 I didn't even know the CBX existed having parked my 72 350-4 in 1978 to raise a family. I returned to motorcycling in 2004 by buying a new Sportster as a retirement gift from me to me and in 2006 began picking up old Honda's. My father and hero passed away in '07 and with the money he left me I was finally able to add my first two "X's".
Thanks again.
http://www.spookytoms.com/SpookyTom-MTRCCLSTF.html

"66CL160, 68CL125A, 68CL450, 69CL125A, 69CB750, 71CB450, 71CB500, 71CB750, 72CB350F, 72CB750, 74CB750, 75CL360, 75CB550, 75CB750, 76CB750, 79CB750, 79CBX, 79CBX, 80CBX, 82CB750, 84VF700S 05HDSPORTSTER1200ROADSTER"

Locked

Return to “HANDLING: Suspension, Gearing, Frame Bracing, Non X Handling Part Upgrades, Rim Replacement Options, and more”