Call for interest - REAR footpeg rubbers

CBXs, new bikes, old bikes, cars, trucks, general chat, off topic, this is the place to post it.
Post Reply
User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3868
Joined: Mon Jan 25, 2010 7:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Call for interest - REAR footpeg rubbers

Post by NobleHops »

Hey-o, this is just a straw poll, no immediate plans to act, but:

Yes or no, would you be interested in high quality REAR footpeg rubbers if a person was to mold them, and if so, how many sets would you take?

N.
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4069
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: Call for interest - REAR footpeg rubbers

Post by steve murdoch icoa #5322 »

Nils, thanks for looking into this but no for me.
They never get used.

CBX-tras
ICOA Member
ICOA Member
Posts: 386
Joined: Tue Feb 16, 2010 1:29 pm
Location: Clinton Twp, Michigan
Location: Clinton Twp., Michigan, USA

Re: Call for interest - REAR footpeg rubbers

Post by CBX-tras »

As I mentioned on the other site:

I have a box, full of good rear pegs since the majority of these bikes are near-never ridden 2 up. I have so many, that I modify the mount and use them for the fronts.

The fronts are always worn, especially the left. When most guys will step up on that peg, twist while throwing the right leg over and rip off the chicklets with the bottom of their boot/shoe.

So, that wouldn't be me.
You do not have the required permissions to view the files attached to this post.

User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3868
Joined: Mon Jan 25, 2010 7:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Re: Call for interest - REAR footpeg rubbers

Post by NobleHops »

These came out great, and my first batch is spoken for with prior orders. If there is interest I may commission a second run, just post up any interest about that here. Selling price is $45 US per pair, PLUS shipping.
rear_CBX_rubbers.jpeg
You do not have the required permissions to view the files attached to this post.
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3868
Joined: Mon Jan 25, 2010 7:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Re: Call for interest - REAR footpeg rubbers

Post by NobleHops »

Guys, our friend Terry Schmitt aka "Tevan" or "Texan" is going to take this over moving forward, and that news is hot off the press. Terry also sells the front rubbers. If you want these, Terry is the guy with whom you should register your interest.
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

Post Reply

Return to “Daily Discussion: By, For & About CBXers”