Hello. Would someone please post a closeup pic of the installed acorn cap nut and washer on the brake lever pivot bolt for a stock 1979? The washer o.d. I have seems too large. Thank you. Mark C.
P.S. I would also like to see a closeup pic of the nut/washer for the clutch lever pivot bolt. Previous owner wasn't good at keeping track of the parts he took off and reinstalled.
Thank you.
Requesting pic of brake pivot nut
-
Kingludd
- New Member & Happy To Be Here
- Posts: 17
- Joined: Sat Aug 13, 2022 2:19 pm
- Location: Washington, DC
- Location: Washington, DC
-
CBX-tras
- ICOA Member
- Posts: 449
- Joined: Tue Feb 16, 2010 1:29 pm
- Location: Clinton Twp, Michigan
- Location: Clinton Twp., Michigan, USA
-
daves79x
- ICOA Technical Director
- Posts: 4864
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Requesting pic of brake pivot nut
I think you mean the handlebar levers? The clutch lever came originally with a nut and flat washer, brake lever the same. I think some later bikes came with the flange nut on the brake lever only. Most guys just put two flange nuts on them - there were never acorn nuts there.
Dave
Dave