1/2" brake master cyl

Post Reply
User avatar
cross
ICOA Member
ICOA Member
Posts: 871
Joined: Tue Jan 21, 2014 11:26 am
Location: San Diego
Location: San Diego, Ca

1/2" brake master cyl

Post by cross »

Hey guys,

I'm in need of rebuilding my triumphs front and rear brakes.
Triumph prices are crazy so since these brake parts I researched a bit. I was able to find caliper and rear master seals from one of Honda models but can't find anything for the front master. It is 1/2" bore.
Anyone by any chance know if any Japanese bikes have 1/2" master bore?

Thanks
Sasha
Sasha

'82 Honda CBX
'99 Triumph TBS
'01 Honda Valkyrie

:auto-sportbike:

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4069
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: 1/2" brake master cyl

Post by steve murdoch icoa #5322 »

'73 CB350 had the single disc.
This item shows as sold out but the chart at the bottom shows a bunch of 1/2" bore bikes.
http://www.ricepaddy.com/brand-new-niss ... llent.html

Pretty sure the early Sportster was that small as well. Sketchy memory on that one.

User avatar
cross
ICOA Member
ICOA Member
Posts: 871
Joined: Tue Jan 21, 2014 11:26 am
Location: San Diego
Location: San Diego, Ca

Re: 1/2" brake master cyl

Post by cross »

Mine is a dual disk but I'll look and compare

Thank you
Sasha

'82 Honda CBX
'99 Triumph TBS
'01 Honda Valkyrie

:auto-sportbike:

Post Reply

Return to “BRAKES: Calipers, Pads, Lines, Rotors, Upgrades & Fixes”