Rear brake kit

DevonCbx · Post by **DevonCbx** » Sat Mar 08, 2008 4:35 pm

I am about to put in a rear master cylinder kit and noticed there are 2 small rubber parts. I see only one small rubber part in use for the kit. I am not talking about the boot. Looking at diagrams, I cannot see where both rubber parts go.

Thanks
Duane

EMS · Post by **EMS** » Sat Mar 08, 2008 5:33 pm

Maybe the kit you have is multi-fit and it contains two piston seals for alternative applications?

Chris · Post by **Chris** » Sat Mar 08, 2008 8:05 pm

DevonCbx wrote:I am about to put in a rear master cylinder kit and noticed there are 2 small rubber parts. I see only one small rubber part in use for the kit. I am not talking about the boot. Looking at diagrams, I cannot see where both rubber parts go.

Thanks
Duane

Duane,

Here is a thread that discusses the 2 seals and how they are placed.

viewtopic.php?t=3488&postdays=0&postorder=asc&start=60

The International CBX Owners Association

Rear brake kit

Rear brake kit

Re: Rear brake kit