Requesting pic of brake pivot nut

Post Reply
Kingludd
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 11
Joined: Sat Aug 13, 2022 2:19 pm
Location: Washington, DC
Location: Washington, DC

Requesting pic of brake pivot nut

Post by Kingludd »

Hello. Would someone please post a closeup pic of the installed acorn cap nut and washer on the brake lever pivot bolt for a stock 1979? The washer o.d. I have seems too large. Thank you. Mark C.

P.S. I would also like to see a closeup pic of the nut/washer for the clutch lever pivot bolt. Previous owner wasn't good at keeping track of the parts he took off and reinstalled.

Thank you.

CBX-tras
ICOA Member
ICOA Member
Posts: 250
Joined: Tue Feb 16, 2010 1:29 pm
Location: Clinton Twp, Michigan
Location: Clinton Twp., Michigan, USA

Re: Requesting pic of brake pivot nut

Post by CBX-tras »


daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4445
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Re: Requesting pic of brake pivot nut

Post by daves79x »

I think you mean the handlebar levers? The clutch lever came originally with a nut and flat washer, brake lever the same. I think some later bikes came with the flange nut on the brake lever only. Most guys just put two flange nuts on them - there were never acorn nuts there.

Dave

Post Reply

Return to “BRAKES: Calipers, Pads, Lines, Rotors, Upgrades & Fixes”