Vendors available

Companies or individuals that provide parts/accessories/services for our CBXs.

Post Reply
User avatar
Ringnalda
ICOA Staff
ICOA Staff
Posts: 560
Joined: Sat Oct 25, 2003 11:47 am
Location: Columbus, OH
Location: Cruzin at 35,000ft...

Vendors available

Post by Ringnalda »

I poached some of this from another thread: USEFUL INFO

For a good catalogue and cross reference list, as well as a huge stock of OEM and replacement parts, try:

http://www.cmsnl.com

They also have a 'wishlist' page and a forum to discuss parts as well as technical issues. Very professional setup.

--

Louis Mintrone is an ICOA member, and has a large inventory of NOS and used parts. He's gonna have just about anything. Very helpful, very responsive:

http://www.usedcbxparts.com

When you buy used parts, it is my advice to always get a picture of the actual part you are buying. Saves a lot of time in discussions afterwards. Perception of condition is different in everybody.

--

Bill Brint from Tim's CBX also has a lot of parts, somewhat concentrated in engine stuff, but he's got lots of other stuff too, suspension stuff, etc. Bill has commissioned some reproductions of unavailable items too. Like Louis, Bill is super helpful, responsive, knowledgeable, the works:

http://timscbx.com/

--

David Silver Spares is in the UK, and seems well regarded here. Similar to CMSNL they purchase large stocks of NOS parts and list them available and catalogued to the needy collectors like us:

http://www.davidsilverspares.co.uk/

--

For parts searches, I have taken to using these folks' online fiche, in part because they indicate whether or not an item is available or not right in the fiche. I hate to admit it though, I usually order elsewhere.

http://www.babbittsonline.com

--

Ron Ayers is another possible resource, as with all of these suggestions, check things out for yourself. Prices can be good and you can often Google search for a discount code.

http://www.ronayers.com

--

OldBikeBarn will surprise you now and then, and they occasionally deeply discount their stuff:

http://www.oldbikebarn.com

--

Here's Service Honda's site, previously mentioned:

http://www.servicehonda.com/

--

Randakk's is another specialty shop for vintage stuff, might be an ICOA member too, well regarded for several specialty items, site has lots of good info and advice:

http://www.randakks.com/

--

You need to know about Mike Nixon (another ICOA guy), as he will service carbs, sells a few good booklets, and is THE MAN for just about any topic he opines on. His site has a lot of priceless technical info:

http://www.motorcycleproject.com

--

Six Center in Holland does some cool stuff, is having reproduction parts made for turnsignal housings, etc, and other impossible to find stuff.

http://www.sixcenter.nl/

--

I found these guys who seemed to have some hard-to-find items at very reasonable prices, have not used them yet though:

http://www.hondarestoration.com

--

There is a cool guy on CBXWorld named JR (not sure if he reads here), and he runs a little outfit called CBXtras with some odds and ends. Can't find a site for him just now, perhaps others will chime in.

--

There is an eBay vendor, TAS Classic Motorsports that sell cheap, ships fast and cheap, well regarded. I have bought a bunch of stuff from them:

http://stores.ebay.com/TAS-Classic-MotorSports

--

Several of the guys here have little cottage industries, making one-off items now and then. They don't really advertise, and they do it more for love than money it seems, but keep your eyes and ears open and you may be surprised at what offers for help you get. Also, although parts can be expensive, many of the guys here have stashes and will sell stuff to other members very reasonably. If you can't find what you need, post a 'wanted' and see what turns up.

Please mention any other vendors and or good or bad experiences so we can keep this list current and add comments where necessary.

CHeers, Jan
Good judgement comes from experience. Experience comes from bad judgement.

Terry
ICOA Member
ICOA Member
Posts: 2306
Joined: Thu Jan 30, 2003 9:45 pm
Location: norcal
Location: Northern California, USA

Post by Terry »

Should this info be combined in this thread?

viewtopic.php?t=5624
It ain't the destination, its the journey...

User avatar
Ringnalda
ICOA Staff
ICOA Staff
Posts: 560
Joined: Sat Oct 25, 2003 11:47 am
Location: Columbus, OH
Location: Cruzin at 35,000ft...

Vendor consolidation.

Post by Ringnalda »

Yes we need to consolidate all this good info...

Jan
Good judgement comes from experience. Experience comes from bad judgement.

User avatar
80 cbx dude #6216
ICOA Member
ICOA Member
Posts: 285
Joined: Wed Jul 29, 2009 5:19 pm
Location: Fort Lonesome, Florida,USA
Location: Florida

Post by 80 cbx dude #6216 »

J.R. offers complete alternator conversion kits-do it yourself kits and adapter plate kits-These alternators are first rate items. His email is jrluksik at wowway.com .-Mike

EMS
ICOA Member
ICOA Member
Posts: 10151
Joined: Wed Mar 05, 2003 7:55 am
Location: North East OH, ICOA 3904

Post by EMS »

80 cbx dude #6216 wrote:J.R. offers complete alternator conversion kits-do it yourself kits and adapter plate kits-These alternators are first rate items. His email is jrluksik at wow dot com.-Mike
I don't think he likes us here:
I somehow never did like the ICOA nor felt welcomed there

I suspect that a year or so from now they'll be out of business due to all of this stuff

User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3881
Joined: Mon Jan 25, 2010 7:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Post by NobleHops »

EMS wrote:
80 cbx dude #6216 wrote:J.R. offers complete alternator conversion kits-do it yourself kits and adapter plate kits-These alternators are first rate items. His email is jrluksik at wow dot com.-Mike
I don't think he likes us here:
Well I'm happy to report that J.R. just created a login today, so perhaps he's willing to reconsider.

J.R., you make really awesome products by all accounts and your customers seem to love you. Glad to have you back on the site, even if just to read.

N.

P.S. J.R. if you reply with the web address of your enterprise, I'll add it to the post here, and the other one I made in the restorations thread.
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

CBX-tras
ICOA Member
ICOA Member
Posts: 404
Joined: Tue Feb 16, 2010 1:29 pm
Location: Clinton Twp, Michigan
Location: Clinton Twp., Michigan, USA

Post by CBX-tras »

Let's just say that I was asked to come over and be part of the group by a few respected ICOA members and thanks for the invite.

I have a great deal of CBX knowledge that I'm happy to share with anyone that can benefit from it and at the same time, keep an open mind to new ideas.

Correction to Mike's posting above:

My email is: jrluksik@wowway.com

Drop me a note if you have any questions.

Glad to be here, I'm feeling all warm and fuzzy already.

J.R.

User avatar
alimey4u2
ICOA Web Video Director
ICOA Web Video Director
Posts: 5093
Joined: Fri Aug 11, 2006 1:03 pm
Location: Uphill, WsM, United Kingdom

Post by alimey4u2 »

Hello & welcome to the site J.R.... :thumupp:
ICOA # 656

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4079
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Post by steve murdoch icoa #5322 »

I have 2 of the alternator conversions from J.R. and they have performed flawlessly and look great.
I am also feeling warm and fuzzy but i think it was bad Chinese.

EMS
ICOA Member
ICOA Member
Posts: 10151
Joined: Wed Mar 05, 2003 7:55 am
Location: North East OH, ICOA 3904

Post by EMS »

CBX-tras wrote:
Glad to be here, I'm feeling all warm and fuzzy already.

J.R.
Good to have you, J.R...and we can always fix you up with an ICOA sweatshirt to make you feel cozy in case it gets a litle chilly.. :D :D

Post Reply

Return to “CBX Parts & Accessory Suppliers, Dealerships, Mechanics, OEM Parts, Speciality CBX Shops”