Wheel restoration

Post Reply
Spiderlarry
ICOA Member
ICOA Member
Posts: 9
Joined: Wed Apr 03, 2013 11:55 pm
Location: Garden Grove, Calif
Location: Garden Grove, Calif

Wheel restoration

Post by Spiderlarry »

New CBX Owner and new to this website. Any advice on how to restore CBX rims and who should do it? I am a prerry capable mechanic and am not afraid of tackling new jobs small advice will be welcome.

Spiderlarry (former Alfa Romeo site name)
Larry

EMS
ICOA Member
ICOA Member
Posts: 10151
Joined: Wed Mar 05, 2003 7:55 am
Location: North East OH, ICOA 3904

Re: Wheel restoration

Post by EMS »

Welcome to the ICOA forum, Larry!

What year CBX are you talking about? Be prepared that restoring wheels is a painful job. Contrary to what some people may say, it is not recommended to disassemble the Comstar wheels (rims from spokes and hubs).
The most elaborate thing you can do is powdercoat. This requires quite some prep work, however.

daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4738
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Re: Wheel restoration

Post by daves79x »

EMS is right. Restoring these wheels is a pain. I'm assuming you are talking about the silver '79 Comstars? Powder coating to a close original finish is the way to go. The black ones are not nearly as much work.

Dave

barryadam
ICOA Member
ICOA Member
Posts: 283
Joined: Thu Oct 15, 2009 12:33 am
Location: Mission Viejo, California, USA
Location: Mission Viejo, California, USA

Re: Wheel restoration

Post by barryadam »

Welcome Larry.

If you need a decent set of original 1979's, I have some that are VERY reasonable.
They are not dinged or damaged, but could use some cleanup.
Plus, I see you are in GG. I work in GG. I will deliver them to you.

Barry

daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4738
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Re: Wheel restoration

Post by daves79x »

That's the best option!

Dave

Spiderlarry
ICOA Member
ICOA Member
Posts: 9
Joined: Wed Apr 03, 2013 11:55 pm
Location: Garden Grove, Calif
Location: Garden Grove, Calif

Re: Wheel restoration

Post by Spiderlarry »

Thanks for the advice. I have a 1980 CBX with black rims. Not opposed to powder coating, any special tips? Also willing to consider buying clean used wheels. Call my mobile at 323-855-7217.

barryadam
ICOA Member
ICOA Member
Posts: 283
Joined: Thu Oct 15, 2009 12:33 am
Location: Mission Viejo, California, USA
Location: Mission Viejo, California, USA

Re: Wheel restoration

Post by barryadam »

Rats!

Well, if you want to go silver, let me know.

Barry

daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4738
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Re: Wheel restoration

Post by daves79x »

The black rims can be bead/soda blasted and painted. Just need to mask the rim and then zip off the edges with a Dremmel. Better option would be to find a set of school bike '81-'82 wheels. Same look, but both are wider. Still a good supply of those out there.


Dave

Spiderlarry
ICOA Member
ICOA Member
Posts: 9
Joined: Wed Apr 03, 2013 11:55 pm
Location: Garden Grove, Calif
Location: Garden Grove, Calif

Re: Wheel restoration

Post by Spiderlarry »

Dave,

Maybe a dumb question but what are school bike wheels?

Larry

Rick Pope
ICOA Rally Director
ICOA Rally Director
Posts: 2270
Joined: Wed Sep 03, 2003 3:16 pm
Location: Lawrencburg, IN
Location: Lawrenceburg, Indiana

Re: Wheel restoration

Post by Rick Pope »

Honda donated a lot of bikes to trade or high schools for mechanical classes. These were supposed to be gathered up and destroyed when the scholl was done with them. Most fell into private hands, were somehow titled, or parted out. Many were pristine, some beat up pretty badly. Most of the CBX school bikes were the 1981 or "B" model.
Rick Pope
Either garage is too small or we have too many bikes. Or Momma's car needs to go outside.

Spiderlarry
ICOA Member
ICOA Member
Posts: 9
Joined: Wed Apr 03, 2013 11:55 pm
Location: Garden Grove, Calif
Location: Garden Grove, Calif

Re: Wheel restoration

Post by Spiderlarry »

Rick,

Thanks for the clarification. So I should look for wheels for an 81-82 CBX? How much wider are they? Any clearance issues to be aware of?

Larry

daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4738
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Re: Wheel restoration

Post by daves79x »

Larry:

Pro-Link wheels will bolt right on. 2.50 front and 2.75 rear. Far more common than replacement '80 wheels.

Dave

Post Reply

Return to “TIRES & RIMS: Tire Brands, Mileage, Performance, Sizes, Interchangeability with other models”