IT'S A DRY HEAT! 1979 CBX restoration adventure


User avatar
sixpiny0da
Forum Regular
Forum Regular
Posts: 30
Joined: Sat Apr 09, 2022 2:03 pm
Location: Sun City, AZ
Location: Sun City, AZ

Re: IT'S A DRY HEAT! 1979 CBX restoration adventure

Post by sixpiny0da »

Yes, I'll be powdercoating and I'll have them inspect the area. Are there certain parts that you think should be powdercoated and others to avoid?

User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3868
Joined: Mon Jan 25, 2010 7:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Re: IT'S A DRY HEAT! 1979 CBX restoration adventure

Post by NobleHops »

This area:
check_this.jpeg
That is actually hollow, and there are little drains at the bottom (arrow) where water is intended to drain. It is not unusual for crud or even blast media to get in there and plug it and if it does, it can rust out from the inside, mostly unseen. Step 1, probe your drain or even flush some water down the tube from above and see if drains easily and is clean coming out (would be good). Step 2, print this and carry it to your powdercoater and ask them to inspect this area carefully for any signs of perforation after they blast it.
You do not have the required permissions to view the files attached to this post.
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3868
Joined: Mon Jan 25, 2010 7:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Re: IT'S A DRY HEAT! 1979 CBX restoration adventure

Post by NobleHops »

..and when you get it back, verify that it is NOT plugged up as a result of their work!
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

User avatar
sixpiny0da
Forum Regular
Forum Regular
Posts: 30
Joined: Sat Apr 09, 2022 2:03 pm
Location: Sun City, AZ
Location: Sun City, AZ

Re: IT'S A DRY HEAT! 1979 CBX restoration adventure

Post by sixpiny0da »

I did notice holes on the swingarm, but I didn't notice these holes. It's probably crudded up. Good news is that it's spent most of it's life in Phoenix. Thanks for the details. My question was more broad though in that what other parts on the bike should be coated in your experience and what parts should not be coated. I have read conflicting opinions on the calipers for example. I know some things simply aren't right or wrong, but others are a must.

User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3868
Joined: Mon Jan 25, 2010 7:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Re: IT'S A DRY HEAT! 1979 CBX restoration adventure

Post by NobleHops »

Totally subjective, a matter of your own intentions.

For me? A restored bike is never going to be an original bike, so I don't pretend that it is. So I do things that some guys dislike, including powdercoating parts that Honda painted. I prefer powdercoat to paint for many parts because it's very durable, it's fast for us to do, and it looks great, and it's a lot easier for us to do in house.

We powdercoat all of our brake components.
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

User avatar
sixpiny0da
Forum Regular
Forum Regular
Posts: 30
Joined: Sat Apr 09, 2022 2:03 pm
Location: Sun City, AZ
Location: Sun City, AZ

Re: IT'S A DRY HEAT! 1979 CBX restoration adventure

Post by sixpiny0da »

Thanks Nils. I appreciate your candor.

User avatar
sixpiny0da
Forum Regular
Forum Regular
Posts: 30
Joined: Sat Apr 09, 2022 2:03 pm
Location: Sun City, AZ
Location: Sun City, AZ

Re: IT'S A DRY HEAT! 1979 CBX restoration adventure

Post by sixpiny0da »

Hi all. I've been absent for a long time, but other priorities have controlled my life. This will definitely be a long term project, and I will finish it. In the meantime, I posted a video on the rear wheel hub.
[youtube]https://youtu.be/6ga-soC7jC8[/youtube]

User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3868
Joined: Mon Jan 25, 2010 7:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Re: IT'S A DRY HEAT! 1979 CBX restoration adventure

Post by NobleHops »

Glad to see you back at it. Give a jingle if you get hung up, or want to come down and do a project in our shop. I’m sure Joe and I can host you for a mini tech day if you can use help with anything.
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

User avatar
sixpiny0da
Forum Regular
Forum Regular
Posts: 30
Joined: Sat Apr 09, 2022 2:03 pm
Location: Sun City, AZ
Location: Sun City, AZ

Re: IT'S A DRY HEAT! 1979 CBX restoration adventure

Post by sixpiny0da »

Hello again. I'm at a stand still until I have money, but I just made a video based on what I've done in the past. I'm so itching to get into this project, but I have to be patient. Hopefully it's our last court date this Thursday and the loser will pay his child support (my wife's ex). It's been 4.5 years now dealing with him and I'm so done.

Hope the video is decent. [youtube]https://youtu.be/xGetAdl9gvc[/youtube]

User avatar
sixpiny0da
Forum Regular
Forum Regular
Posts: 30
Joined: Sat Apr 09, 2022 2:03 pm
Location: Sun City, AZ
Location: Sun City, AZ

Re: IT'S A DRY HEAT! 1979 CBX restoration adventure

Post by sixpiny0da »

Here is the second part of the clutch basket assembly using the kit from Six Center

[youtube]https://youtu.be/BykY_l8FX4k[/youtube]

Post Reply

Return to “RESTORATIONS: Tips, How To's & What Not to Do. Parts, Decals, Painters, Paint Codes, Painting Tips.....More”