Chinese mad VEP Racing CrMo Rods


Post Reply
Warwick Biggs
Amazing Poster
Amazing Poster
Posts: 952
Joined: Tue Nov 03, 2015 9:23 pm
Location: Australia
Location: Australia

Chinese mad VEP Racing CrMo Rods

Post by Warwick Biggs »

Does anybody have any experience with the VEPRacing 'H' pattern CrMo rods? They will be mated to 10.25:1 MTC pistons.

User avatar
bobcat
Power Poster
Power Poster
Posts: 410
Joined: Mon Aug 22, 2011 6:35 pm
Location: Dallas Texas
Location: Dallas Texas

Re: Chinese mad VEP Racing CrMo Rods

Post by bobcat »

Warwick Biggs wrote:
Sun Feb 06, 2022 12:44 am
Does anybody have any experience with the VEPRacing 'H' pattern CrMo rods? They will be mated to 10.25:1 MTC pistons.
Ebay 274506658383 Robtoolmaker. Chinese ? :think:

I have a set I plan to use in my project.
Bob
82 CBX, 81 CBX, CB1100F, 79/82 CB900F (avatar)

Warwick Biggs
Amazing Poster
Amazing Poster
Posts: 952
Joined: Tue Nov 03, 2015 9:23 pm
Location: Australia
Location: Australia

Re: Chinese mad VEP Racing CrMo Rods

Post by Warwick Biggs »

I'm afraid so Bob. That is Hugh Robinson selling the ones you've purchased. Hugh ported an earlier head that I ran on the Lump for a while.

If they are the same they are also marketed as DA Racing but I have no reason at this stage to question the quality. They appear to be well made and within tolerance.

What is your projected use?

User avatar
bobcat
Power Poster
Power Poster
Posts: 410
Joined: Mon Aug 22, 2011 6:35 pm
Location: Dallas Texas
Location: Dallas Texas

Re: Chinese mad VEP Racing CrMo Rods

Post by bobcat »

What is your projected use?
[/quote]

Sorry I overlooked answering this.
Time or purpose ? Obviously I wanted some stronger rods and the price
was relatively reasonable* ($150 off his price if you don't need
the bearings he supplies) and they are to go in a mildly built 1150 motor
with CI pistons.
Time wise, when/if I can physically get to build my project bike. :(

I guess they are working well for you or we would have heard about it by now. :-)
*compare to Carillos
You do not have the required permissions to view the files attached to this post.
Last edited by bobcat on Fri Dec 09, 2022 9:24 am, edited 1 time in total.
Bob
82 CBX, 81 CBX, CB1100F, 79/82 CB900F (avatar)

Warwick Biggs
Amazing Poster
Amazing Poster
Posts: 952
Joined: Tue Nov 03, 2015 9:23 pm
Location: Australia
Location: Australia

Re: Chinese mad VEP Racing CrMo Rods

Post by Warwick Biggs »

So far, so good Bobcat.

Post Reply

Return to “ENGINES: Maintenance, Performance, Parts Sources”