Page 3 of 3
Re: Do any CBX exhausts use this configuration?
Posted: Thu Mar 30, 2023 8:18 pm
by steve murdoch icoa #5322
FalldownPhil wrote: ↑Thu Mar 30, 2023 5:24 pm
This might be a good time to say that Rick Chupp is closing Cycle Outfitters. You should probably contact him sooner rather than later. I recently asked him if he was still supplying the manifolds for the carbs and the answer was yes.
Thanks for that, Phil.
Re: Do any CBX exhausts use this configuration?
Posted: Fri Mar 31, 2023 9:59 am
by Jeff Bennetts
The link I posted for Cycle Outfitters is still working but the drill down menus are turned off, give them a call for your needs.
Call the 1 888 number on the home page of the site and listen to the days and hours of operation, they are selling leftover inventory and displays.
Re: Do any CBX exhausts use this configuration?
Posted: Sun Apr 09, 2023 3:29 pm
by Duffey Lake rd.
The left side of my new exhaust just pops off in a few minutes, handy to put the center stand back on for oil changes or upright storage. Not too loud or it can be without the removable DB Killer.
-Scott