Page 1 of 1
Alternator drive plates
Posted: Tue Apr 27, 2021 4:40 am
by igotadizzy
Is anybody manufacturing new alternator drive discs, as mine are totally shot inner plate being worn to the point that the 4 radial grooves from inner to outer are almost flush. Also are they all supposed to have 2 washers behind this plate to push on the spring as mine only has the one.
Mike
Re: Alternator drive plates
Posted: Tue Apr 27, 2021 8:06 am
by steve murdoch icoa #5322
Yes, there are two washers.
Two different thicknesses. Both are becoming difficult to find as are the plates.
https://www.motorcycleproject.com/text/ ... lutch.html
Might check with David Silver or cmsnl.com for the plates if they can't be resurfaced.
Re: Alternator drive plates
Posted: Tue Apr 27, 2021 10:47 am
by Larry Zimmer
Always can ask Louis Mintrone at usedcbxparts.com
Re: Alternator drive plates
Posted: Tue Apr 27, 2021 2:02 pm
by tevan
Look up Cary knapton. I believe he is in the uk. He has been putting fiber plates on them with good results. I believe if you send your plates in to him he applies the fiber for you.
Re: Alternator drive plates
Posted: Wed Apr 28, 2021 11:02 am
by hondaman160mph
Do a search here, tons of info on this subject.
TrueDisc LLC will resurface your plates including cutting
in the 4 oiling groves for about $200.00. Get a shim washer from Mike Nixon and the washer you're missing
from Louis.