Smart System Turn Signal Cancel product


Post Reply
Artie
ICOA Member
ICOA Member
Posts: 170
Joined: Tue Oct 15, 2013 4:35 pm
Location: Medford Ma
Location: Medford Ma

Smart System Turn Signal Cancel product

Post by Artie »

Sounds like a great product if works as advertised and reliable not cheap @$99,
anyone have any experience?
I along with others I’m sure have and occasionally leave blinker on DUH!
When I do it,and after,every time my stomach rolls as as to my Own stupidity
it’s such a dangerous thing to do inviting anyone to think your turning and they can act accordingly, it’s a good way to get myself killed!
My GS has it standard and I love that feature.
I want to outfit my other rides with a system any suggestions ( other than a better brain)
Smart seems to be well engineered but made in Slovenia ??????
Thanx in advance

JoeInTUS
Forum Regular
Forum Regular
Posts: 117
Joined: Sun Jul 12, 2020 4:01 pm
Location: Tucson, AZ
Location: Tucson, AZ

Re: Smart System Turn Signal Cancel product

Post by JoeInTUS »

I used a Kisan SignalMinder on my BMW K75 for five years until I sold the bike. It really worked well on that bike since the cancel button was an awkward reach for me.

Kisan's customer service was top-notch. Through my own stupidity I managed to smoke the unit and they replaced it without question.
Joe S
Tucson, AZ

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4069
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: Smart System Turn Signal Cancel product

Post by steve murdoch icoa #5322 »

Joe, was it a simple plug and play....the second one at least. lol.
https://kisantech.com/signalminder.html ... 8qkFxNr6m5

Artie
ICOA Member
ICOA Member
Posts: 170
Joined: Tue Oct 15, 2013 4:35 pm
Location: Medford Ma
Location: Medford Ma

Re: Smart System Turn Signal Cancel product

Post by Artie »

Sure has lots of features but looks very confusing
looks difficult to install poor website info

JoeInTUS
Forum Regular
Forum Regular
Posts: 117
Joined: Sun Jul 12, 2020 4:01 pm
Location: Tucson, AZ
Location: Tucson, AZ

Re: Smart System Turn Signal Cancel product

Post by JoeInTUS »

On my K75 it was plug and play with the exception of the brake over-ride which required tapping into the brake light wire. Programming was straight forward and once it was set I never touched it again. Of note, the SignalMinders for BMWs put a parasitic load on the battery (something to do with 4 way flashers) This would not be the case with the CBX since there is no power to the relay with the ignition off.

I am confused by Kisan's recommendation for the CBX. Since there is not a plug for the turn signal relay, I think that the universal model (SM-3SV) would be more appropriate. Otherwise you would need to find the appropriate plug.

As far as ease of installation, it is only 3 or 4 (with brake over-ride) wires in an easily accessible location. So electrically it is pretty simple. I do not have any experience with the return spring setup.
Joe S
Tucson, AZ

Post Reply

Return to “ELECTRICAL: Alternator, Batteries, Headlights, Switches, Tailights, Wiring....”