Page 1 of 1
Carb Boot Quality
Posted: Wed Aug 10, 2022 5:54 pm
by Artie
So many variations and pricing on these
anyone use these?
How can you assure quality,hate to be a cheap but….
Is there any need to spend 3 times the price
https://www.ebay.com/itm/134179160386?_ ... %3A2047675
Re: Carb Boot Quality
Posted: Wed Aug 10, 2022 6:55 pm
by daves79x
Don't use those! Either OEM Honda ones, still available, or Randakk, or I think JR carries good ones too.
Dave
Re: Carb Boot Quality
Posted: Thu Aug 11, 2022 4:26 pm
by Larry Zimmer
Might check with Bill Brint, too. Tim's CBX Not worth going 'inexpensive' as Dave said.
Re: Carb Boot Quality
Posted: Fri Aug 12, 2022 7:36 am
by CBX-tras
The ones that I carry are made by the same vendor that Honda uses.
Re: Carb Boot Quality
Posted: Fri Aug 12, 2022 11:25 am
by tevan
The ones that I carry are made by the same vendor that Honda uses.
How did you figure out where Honda had there’s made J.R.?
Re: Carb Boot Quality
Posted: Sat Aug 13, 2022 8:56 am
by CBX-tras
Tiny trademark molded into the parts. So small it just appears as a defect in the mold, near microscopic.
I compared them to known removed and new components from Honda.
Re: Carb Boot Quality
Posted: Fri Oct 21, 2022 6:11 pm
by itsacbx
Take my word for it- use that chinese shit at your peril!!!!!!!
Buy genuine or from Bill or Louis or a reputable supplier.
Al
Re: Carb Boot Quality
Posted: Sat Oct 22, 2022 9:39 am
by CBX-tras
I am also a known and reputable supplier, doing more R&D than most others will or can.
I'm the guy that tested and qualified all the CBX components for Randall Washington, aka Randakk's Cycle Shakk when he owned that business.
If I say it's GOOD, then it is.