I would like to thank all the guys that gave me the best way to re-install the carburators on my 82/82 cbx.The deal was , use a heat gun to warm up the parts spray liberally with silicone and singlehandedly in about 1 minute I had the lot on, only to find out I coud not reach the carb retaining bands on 3 and 4 so off the lot came again, started fromthe same point, warm it all up spray the silicone on and WOW strait back on.
Thanks guys you saved me from swearing out the neighborhood ( as I sometimes do ) so from here on tilting the engine and removing carburators is dead simple, try it.
Chris