LOOKING for carb overhaul specialist

Post Reply
Aeronca
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 16
Joined: Wed Mar 27, 2019 7:55 pm
Location: Oakville
Location: Oakville

LOOKING for carb overhaul specialist

Post by Aeronca »

Just brought my 1980 CBX out of hibernation. It has only been driven for less than 1 hour per year for the last 15.
Carbs were overhauled 9 years ago but number 2 now not engaging until RPM 4000 plus. Other 5 carbs seem fine. Bike runs very well even on 5 cylinders until number 2 kicks in and then no problem. It is difficult to start cold but what else is new as its been that way back into the 90s.
Im looking into removing the carbs for troubleshooting and calibration by someone more experienced than my basic knowledge of such a job.. Does anyone know of a reputable outfit who comes recommended?

It would be great to find someone in the Toronto area as I live in Oakville Ontario.

Thanks very much for any suggestions.

Larry Zimmer
ICOA Web Post/Pix/Video Archive Mgt
ICOA Web Post/Pix/Video Archive Mgt
Posts: 2195
Joined: Mon Dec 15, 2003 2:32 pm
Location: Brighton, MI
Location: Brighton, Mich
Contact:

Re: LOOKING for carb overhaul specialist

Post by Larry Zimmer »

Your best bet would be Dave McMunn -- daves79x
Larry Zimmer
cbxlarry@sbcglobal.net

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4068
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: LOOKING for carb overhaul specialist

Post by steve murdoch icoa #5322 »

There may be somebody but i have not heard of anybody in Ontario.
Larry mentioned Dave, a couple other people i would trust is Mike Nixon https://motorcycleproject.com/ or J.R. Luksik cbxtras@gmail.com

Post Reply

Return to “CARBS: Cleaning, Rebuilding, Swaps, Aftermarket, Tuning, Syncing, and More”