Page 12 of 15

Re: My CBX1000C Restore Project

Posted: Thu Apr 07, 2022 1:55 pm
by bikeymikey748
Looks brill, super job πŸ‘

Re: My CBX1000C Restore Project

Posted: Thu Apr 07, 2022 6:20 pm
by pablotrini67
Looks really good ,just wandering if you have ridden a pro-link before ,just my opinion but I find them more enjoyable to ride than the 79 , it's definitely a more refined ride plus the fairing adds some protection.

Re: My CBX1000C Restore Project

Posted: Thu Apr 07, 2022 8:16 pm
by Rick Pope
Very very nice.

Re: My CBX1000C Restore Project

Posted: Thu Apr 07, 2022 9:26 pm
by steve murdoch icoa #5322
Wow! Looks great, Ken.
Would love to hear a clip of those shiny Supertrapps run through the gears i

Re: My CBX1000C Restore Project

Posted: Fri Apr 08, 2022 8:42 am
by Syscrush
Amazing work, so glad to see it all come together.

There are a lot of nice personal touches on this bike, and all of it done to a really high standard, it's great to see your plan executed so well.

It's funny, I have an irrational hatred for crash bars, and I thought that painting them body color was a mistake, but when I see them on the bike and the color and even the shape ties in with the fairing - it looks great to me. That change plus blacking out the lower part of the tail section really draws the eye to the best-looking parts of the bike and makes it look better-balanced visually to me than most Pro-Links.

My hat's off for a job well done.

I think that this might become my go-to question for nice completed builds: have you thought about getting some good photos taken by a pro, maybe submit the bike for a feature somewhere?

Re: My CBX1000C Restore Project

Posted: Fri Apr 08, 2022 9:16 am
by heli_madken
Thanks Everyone, very much appreciated.

Phil, thanks you so much for your comments. Jeff mentioned that he didnt like the red crash bars because they didnt 'flow' which I appreciate but I figured once the leg shields where on they would match their angle.

Yes I have found taking photographs on this thread very frustrating, even the finished photographs are not very good. I used a very good quality clear coat, spent a lot of time flatting out then polishing with a DA followed by a very good quality 3 stage quartz/silicone polishing system. The depth of the shine is fantastic but my camera just doesn't show it. So a professional photographer might be the answer and around here there are plenty of stunning locations.

Trying again using flash in the garage but it still doesn't get it -
20220408_140256.jpg
My next challenge is getting through an inspection before I can register the bike. I live in a remote area and the nearest testing station is 56 miles away. I took a drive up there yesterday to book in. When I explained that I needed an MOT on an unregistered bike (which is legally possible) the poor old guy just looked at me blankly. I explained that it was possible and even told him how to enter the 'Not Known' in the registration field but he insisted that in his last 50 years as an MOT inspector he had never come across it and I had to get the bike registered first. It was actually quite funny trying to explain the process to him but in the end I got a flat no. It really is a different world up here its like going back in time 50 years.

So I have to figure out my next move now!

Re: My CBX1000C Restore Project

Posted: Fri Apr 08, 2022 10:01 am
by hondaman160mph
Excellent build and an absolutely beautiful paint job!
Good luck with your registration.

Re: My CBX1000C Restore Project

Posted: Fri Apr 08, 2022 11:22 am
by heli_madken
Thank you, very much appreciated hondaman160mph.

I almost forgot, I mentioned that I had designed an adapter to tackle dynamic timing, its in 3 parts -
Dynamic Timing Adapter.jpg
The first part is an adapter and bolts directly to the crankcase housing using hex head screws -
20220403_154447.jpg
Then onto this bolts a glass holder, there is glass in this picture you just cant see it -
20220403_154257.jpg
I painted the F mark on the crankshaft yellow, warmed the engine up with the usual cover on then swapped to the adapter. I have a good quality strobe but I could see the timing mark clearly so any strobe would do it I think. Takes just a few seconds to get the timing spot on.

If you want the files to get one printed they are here for a couple of days, if you cant get them PM me -
https://files.fm/u/pnsxggmtz

You will need a piece of 95 x 4mm glass like this one -
https://www.ebay.co.uk/itm/323161700495

You will also need an extra gasket

Re: My CBX1000C Restore Project

Posted: Sat Apr 09, 2022 10:32 am
by AshishNJ
I made similar to this on my wood cnc router and used hdpp and plexiglass

Thanks for sharing. Look more neat

Re: My CBX1000C Restore Project

Posted: Sat Apr 09, 2022 2:49 pm
by Syscrush
heli_madken wrote: ↑
Fri Apr 08, 2022 9:16 am
Yes I have found taking photographs on this thread very frustrating, even the finished photographs are not very good. I used a very good quality clear coat, spent a lot of time flatting out then polishing with a DA followed by a very good quality 3 stage quartz/silicone polishing system. The depth of the shine is fantastic but my camera just doesn't show it. So a professional photographer might be the answer and around here there are plenty of stunning locations.
Getting good photos of something highly reflective is very tricky. I'm no expert, but I expect that using the flash is nearly the worst thing you could do - you don't want a point source of harsh light, you want a large amount of very diffuse light. If you can wheel the bike out on an overcast day, put your camera on a tripod, fit a polarizing filter to let you tune the reflections, and do a longer exposure, you'd get a much better result.

A big part of the skill that the pros have is how to properly manage light. Like wrenching on bikes, some of that comes down to equipment, but the most important factor is knowledge of what gear to use and how to use it.

IMO a pro photographer who specializes in bikes & cars would be well worth it, but if you want to get specific advice or guidance on getting the best pics of your bike then consider joining the conversation in this thread. Some of the participants there have done some really nice work and may be able to offer good pointers.

Re: My CBX1000C Restore Project

Posted: Wed Apr 13, 2022 7:33 am
by bikeymikey748
I almost forgot, I mentioned that I had designed an adapter to tackle dynamic timing, its in 3 parts -
Dynamic Timing Adapter.jpg
The first part is an adapter and bolts directly to the crankcase housing using hex head screws -
20220403_154447.jpg
Then onto this bolts a glass holder, there is glass in this picture you just cant see it -
20220403_154257.jpg
I painted the F mark on the crankshaft yellow, warmed the engine up with the usual cover on then swapped to the adapter. I have a good quality strobe but I could see the timing mark clearly so any strobe would do it I think. Takes just a few seconds to get the timing spot on.
Brilliant bit of McGyvering on your part Ken πŸ‘

Re: My CBX1000C Restore Project

Posted: Wed Apr 13, 2022 9:34 am
by heli_madken
Thank you but I think I am going to delete this thread after just looking at your build, how boring is my bike in comparison, depressed :(

Re: My CBX1000C Restore Project

Posted: Wed Apr 13, 2022 9:43 am
by bikeymikey748
heli_madken wrote: ↑
Wed Apr 13, 2022 9:34 am
Thank you but I think I am going to delete this thread after just looking at your build, how boring is my bike in comparison, depressed :(
Funny, I don’t see it like that at all and hope you’re joking.
You have done a terrific build and we are all the better for your having shared it with us all.
Stand tall, Cadet πŸ‘

Re: My CBX1000C Restore Project

Posted: Wed Apr 13, 2022 9:58 am
by heli_madken
Yeah I guess there isnt any such thing as a boring CBX1000!

There are some beautiful bikes on this forum and very talented individuals building them

Re: My CBX1000C Restore Project

Posted: Wed Apr 13, 2022 1:38 pm
by bikeymikey748
heli_madken wrote: ↑
Wed Apr 13, 2022 9:58 am
Yeah I guess there isnt any such thing as a boring CBX1000!

There are some beautiful bikes on this forum and very talented individuals building them
Absolutely!
EVERY bike is special, deserving of merit from those of us following along from the sidelines, and a source of pride for the owner.