Dyna S ignition

kerocowboy · Post by **kerocowboy** » Fri Jun 20, 2008 7:52 pm

Just recieved the Dyna S ignition from Tims,but no set up instructions.

Can someone email them or tell me where I can download them.
Thanks Kero

415ZR1 · Post by **415ZR1** » Fri Jun 20, 2008 9:24 pm

kerocowboy · Post by **kerocowboy** » Fri Jun 20, 2008 10:10 pm

Cool... thanks for that.........

kerocowboy · Post by **kerocowboy** » Sat Jun 21, 2008 8:33 pm

So for the power supply to the coils,do I use the original 12v wiring and connect it to the red wires....?
The instructions arn't that clear.

kerocowboy · Post by **kerocowboy** » Sun Jun 22, 2008 3:06 am

Done that.....It starts and runs good,but how do you set the timing with a strobe.There no marks on it unless you make your own..

alimey4u2 · Post by **alimey4u2** » Sun Jun 22, 2008 5:11 am

kerocowboy wrote:Done that.....It starts and runs good,but how do you set the timing with a strobe.There no marks on it unless you make your own..

Same as with the factory setup Kero, using the marks on the right crankshaft end &/or the factory tool. The factory tool tests the mechanical advance unit.

cbxtacy · Post by **cbxtacy** » Sun Jun 22, 2008 5:34 am

Kero, you can go to this link to find a link from another source to find a discussion about timing with pretty pictures and a strobe.
viewtopic.php?p=25394#25394

alimey4u2 · Post by **alimey4u2** » Sun Jun 22, 2008 5:46 am

cbxtacy wrote:Kero, you can go to this link to find a link from another source to find a discussion about timing with pretty pictures and a strobe.
viewtopic.php?p=25394#25394

Erm, I got lost George...

cbxtacy · Post by **cbxtacy** » Sun Jun 22, 2008 5:55 am

Let me see (hope I don't confuse anyone) if Kerocowboy goes to the thread in the link provided by me above, he'll find out that I left him a PM on another CBX related web site with a link (in the PM) to a discussion about timing with pretty pictures on timing a CBX with a strobe light and degree (home made) wheel. The reason I didn't post the link here is because you have to be logged in to the other site for a link to work. Or something like that. Kind of like politics.

EMS · Post by **EMS** » Sun Jun 22, 2008 10:34 am

Probably because it is all so secret..highly classified stuff

cbxtacy · Post by **cbxtacy** » Sun Jun 22, 2008 10:47 am

I simplified it, I brought the thread to the top of the technical posts.

kerocowboy · Post by **kerocowboy** » Wed Jun 25, 2008 1:27 am

Hey George.
Thanks for the email and the pretty pictures........ :)

Hope the air cond is working in your truck...I've had the heater on all day.
Kero.