BUMP!
Those are some beautiful Comstar wheels, just stripped down like that. Now if only we can get into the 2.5x18" & 2.75x18" sizes, 296mm rotors from CB1100RB, perhaps a smaller rotor on the rear - above all else the 50% lighter Akront "NERVI" rims in say 2.75x18" & 3.5x18" or 3.0x18" & 4.25x18", maybe THEN we could really get off on these wheels!
I hold out hope that somehow someday we'll be able to twist the arm of the MORAD company & bring these "NERVI" rims back from the brink of extinction. Can I get an "AMEN"?
-Sigh.
Naked Comstars
-
- New Member & Happy To Be Here
- Posts: 2
- Joined: Sat Nov 03, 2012 6:32 pm
- Location: Lethbridge Alberta Canada
- Location: Lethbridge Alberta Canada
- Syscrush
- ICOA Member
- Posts: 1718
- Joined: Fri Sep 14, 2012 2:29 pm
- Location: Toronto, ON
- Location: Toronto, ON
Re: Naked Comstars
Welcome. That's quite a first post.SoyBoySigh wrote:BUMP!
Those are some beautiful Comstar wheels, just stripped down like that. Now if only we can get into the 2.5x18" & 2.75x18" sizes, 296mm rotors from CB1100RB, perhaps a smaller rotor on the rear - above all else the 50% lighter Akront "NERVI" rims in say 2.75x18" & 3.5x18" or 3.0x18" & 4.25x18", maybe THEN we could really get off on these wheels!
I hold out hope that somehow someday we'll be able to twist the arm of the MORAD company & bring these "NERVI" rims back from the brink of extinction. Can I get an "AMEN"?
-Sigh.
Do you have a CBX? If so, can we see it?
-
- ICOA Member
- Posts: 4075
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: Naked Comstars
Lay it on him, Sigh.