Replacement idle jets

[sneck]

Does anymore know of a source for replacement idle jets I read somewhere about Kawasaki keihn carburetor models being the same if so any ideas of the part number

Thanks Sneck

[EMS]

I buy them from a guy in Germany. He sells them on ebay also.

http://www.ebay.de/itm/Honda-CBX-1000-C ... 3a69e80384

[SteveG]

These guys seem to have everything a carb needs:

http://www.jetsrus.com/a_jet_kit_street ... 9-1982.htm

Steve

[sneck]

What I should of mentioned is they are for a 79 Z ,

I buy them from a guy in Germany. He sells them on ebay also.

http://www.ebay.de/itm/Honda-CBX-1000-C ... 3a69e80384

EMS:- They appear to be slow jets

Thanks Sneck

[SteveG]

That screw looks like it is still available from Bike Bandit, which normally means you can still get it at your local Honda dealer. #8 on the fiche "Screw Set A", and it appears to include spring and washer with it. Pretty steep price at over $17.00.

http://www.bikebandit.com/houseofmotorc ... #sch402948

Looking at a Honda fiche shows the part # to be 16016-410-601.

Steve

[sneck]

Looking at a Honda fiche shows the part # to be 16016-410-601.

Steve

You appear to be right with the part number Steve I suppose it would of helped if I had put it there in my first post.

Sneck

[oldschoolcarbs]

SNeck, send me an email. I've got new japanese made air/fuel mixture screws (AKA pilot needles), also the washers and orings. Presumably you kept the springs but I've got those too if you need them. I'm not sure if you pm'ed me earlier but if so I apologize. I rarely think to check.

jack (at) oldschoolcarbs (dot) com.

Jack

[EMS]

What I should of mentioned is they are for a 79 Z ,

I buy them from a guy in Germany. He sells them on ebay also.

http://www.ebay.de/itm/Honda-CBX-1000-C ... 3a69e80384

EMS:- They appear to be slow jets

Thanks Sneck

Yes, they are slow jets. That's what I thought you were looking for when you said idle jets. Unique to the 79. What you are looking for, I would call air mix screws. Sorry.
Another English-English vs American English difference??

[sneck]

What I should of mentioned is they are for a 79 Z ,

I buy them from a guy in Germany. He sells them on ebay also.

http://www.ebay.de/itm/Honda-CBX-1000-C ... 3a69e80384

EMS:- They appear to be slow jets

Thanks Sneck

Yes, they are slow jets. That's what I thought you were looking for when you said idle jets. Unique to the 79. What you are looking for, I would call air mix screws. Sorry.



Another English-English vs American English difference??

Sorry about that EMS I will have to be more informative next time

( not to confuse things we in the UK call the slow jets pilot jets )


Thanks Sneck

[EMS]

Sorry about that EMS I will have to be more informative next time

( not to confuse things we in the UK call the slow jets pilot jets )


Thanks Sneck

I think we use that term too, here in the U.S.. But when you said "jet" I was automatically thinking of a brass part with a defined orifice...