Moderators: NobleHops, Larry Zimmer
by Don » Fri Apr 29, 2011 8:53 am
It says they fit front or rear
I wonder if they are all 3 wire (correct for the front) or 2 wire (correct for the rear)?
Let us know what you think of them once you see them in person
Don
-

Don
- ICOA Member

-
- Posts: 881
- Images: 13
- Joined: Wed Apr 02, 2003 4:13 pm
- Location: Biloxi, Mississippi, USA
by cbx1260cc » Fri Apr 29, 2011 1:22 pm
David Silver Spares now offer reproduction turn signals as well. They are TWO wire only though but quality is Very Good. I have a set that just came in. Plan is to take the three wire "innards" out of my stock units and place them into the repro items-effectively converting them into THREE wire pieces.
Ricardo
-
cbx1260cc
- Forum Regular

-
- Posts: 27
- Joined: Wed Oct 18, 2006 11:25 pm
by Got3now » Sun Mar 04, 2012 10:58 am
Did you get the turn signals? Are they good reproductions?
-

Got3now
- Forum Regular

-
- Posts: 61
- Joined: Mon Nov 19, 2007 7:25 pm
- Location: South Florida
by NobleHops » Sun Mar 04, 2012 11:35 am
Just followed that link for fun and they list two types, but don't differentiate the features. One being about 12 pounds cheaper than the other, that's likely the two wire...
N.
-
NobleHops
- ICOA Member

-
- Posts: 1734
- Images: 27
- Joined: Mon Jan 25, 2010 8:17 am
- Location: Santa Cruz, California, USA
-
by EMS » Sun Mar 04, 2012 2:17 pm
I just got myself a set of four, which were also advertised as "fit front AND rear". They are really nice quality, but are two-wire units. Price was 39Euro/pc in Germany. That is about $55.- each.
To be understood is the exception
To be misunderstood is the rule.
-

EMS
- ICOA Secretary

-
- Posts: 7400
- Images: 1230
- Joined: Wed Mar 05, 2003 8:55 am
- Location: North East OH, ICOA 3904
by EMS » Sun Mar 04, 2012 5:59 pm
....and the reason the Euro units are all two-wire units, Europe did not have the "running light" set-up for the front turn signals as the U.S. did.
To be understood is the exception
To be misunderstood is the rule.
-

EMS
- ICOA Secretary

-
- Posts: 7400
- Images: 1230
- Joined: Wed Mar 05, 2003 8:55 am
- Location: North East OH, ICOA 3904
by NobleHops » Sun Mar 04, 2012 10:13 pm
EMS wrote:I just got myself a set of four, which were also advertised as "fit front AND rear". They are really nice quality, but are two-wire units. Price was 39Euro/pc in Germany. That is about $55.- each.
And that's COMPLETE. right MIke? eg lens, trim ring, screws, bulb, guts, etc? That's a great price for an item that was unobtanium or quite expensive for a while.
N.
-
NobleHops
- ICOA Member

-
- Posts: 1734
- Images: 27
- Joined: Mon Jan 25, 2010 8:17 am
- Location: Santa Cruz, California, USA
-
by EMS » Mon Mar 05, 2012 8:34 am
NobleHops wrote: And that's COMPLETE. right MIke? eg lens, trim ring, screws, bulb, guts, etc? That's a great price for an item that was unobtanium or quite expensive for a while.
N.
Yes, Nils, it is.
To be understood is the exception
To be misunderstood is the rule.
-

EMS
- ICOA Secretary

-
- Posts: 7400
- Images: 1230
- Joined: Wed Mar 05, 2003 8:55 am
- Location: North East OH, ICOA 3904
Return to X ...OTHER TECHNICAL: Won't Run, Centerstands, Chains, Fairings, Tanks, Gauges, Petcocks, Seats, Turn Signals, etc.
Who is online
Users browsing this forum: No registered users and 0 guests