drilled rotors

Post Reply
User avatar
cbxtacy
Posting God
Posting God
Posts: 2543
Joined: Sun Aug 29, 2004 4:22 am
Location: San Diego, California, USA
Location: San Diego, California, USA

drilled rotors

Post by cbxtacy »

There used to be someone who advertised in the CBXpress that resurfaced and drilled rotors. Is he still around? I don't trust sending pro link rotors to anyone because they're vented. I saw a pair once that were drilled with no concern to the vanes. They worked okay but looked funny.
one out of four people in this country is mentally unbalanced
think of your three closest friends, if they're okay then
YOU'RE THE ONE

User avatar
alimey4u2
ICOA Web Video Director
ICOA Web Video Director
Posts: 5093
Joined: Fri Aug 11, 2006 1:03 pm
Location: Uphill, WsM, United Kingdom

Post by alimey4u2 »

I remember a while ago on another site this was discussed....As long as the vanes weren't compromised, all would be well....All a matter of indexing, which to a good machine shop wouldn't be a problem...
ICOA # 656

Post Reply

Return to “BRAKES: Calipers, Pads, Lines, Rotors, Upgrades & Fixes”