New Exhaust
-
- ICOA Member
- Posts: 10151
- Joined: Wed Mar 05, 2003 7:55 am
- Location: North East OH, ICOA 3904
New Exhaust
I wonder: I have some connections to a place that does nice stainless steel exhaust work. I could probably persuade them to come up with a 6-1 or 6-2 header. Just the header, not the muffler. The advantage would be everybody could use their own muffler(s) depending on what stage of tuning they run. There are a ton of aftermarket "slip-ons" available that could probably be made to fit.
What is everybody else's opinion?? Is that worth looking into?
What is everybody else's opinion?? Is that worth looking into?
-
- ICOA Member
- Posts: 2306
- Joined: Thu Jan 30, 2003 9:45 pm
- Location: norcal
- Location: Northern California, USA
I might be interested in double wall headers. I'd still like to know why chromers don't, won't or can't rechrome a set of used headers. They should be able to plug the holes so that their (baths) do not get fouled by what's inside. My mufflers look much better than my headers do, on both bikes.
It ain't the destination, its the journey...
-
- Amazing Poster
- Posts: 1299
- Joined: Fri Jan 16, 2004 2:00 pm
I would think that it would be worth looking into. I like the idea of using a modern slip on. There are so many different types of slip on's available.
A 6-2 would probably be what most guys would be interested in.
The Bassani would be a good exhaust to try to duplicate for a 6-1. It was nice because it fit tight to the bike and was barely noticeable. It's muffler was similar in size to a lot of new slip on's.
A 6-2 would probably be what most guys would be interested in.
The Bassani would be a good exhaust to try to duplicate for a 6-1. It was nice because it fit tight to the bike and was barely noticeable. It's muffler was similar in size to a lot of new slip on's.
- Jeff Bennetts
- Posting God
- Posts: 2423
- Joined: Wed Mar 05, 2003 8:38 am
- Location: Ohio, USA
- Location: Ohio, USA
- alimey4u2
- ICOA Web Video Director
- Posts: 5093
- Joined: Fri Aug 11, 2006 1:03 pm
- Location: Uphill, WsM, United Kingdom
- piit
- Forum Regular
- Posts: 137
- Joined: Sat May 20, 2006 1:22 pm
- Location: Tuusula, Finland
- Location: Tuusula, Finland