Re: What did you do to your bike today?
Posted: Sat May 16, 2020 11:03 pm
I put a Stebel Nautilus (air horn) on my BMW and that SOB is loud and proud. Was a PITA to install, and worth it.
The International CBX Owners Association
Dedicated to the enjoyment and preservation of the 6-Cylinder Honda CBX-1000 Motorcycle. Huge technical library!
https://www.cbxclub.com/forum/
What did you do to your bike today?
Page 112 of 128
Re: What did you do to your bike today?
Posted: Mon May 18, 2020 7:59 am
Picture please
Re: What did you do to your bike today?
Posted: Mon May 18, 2020 2:09 pm
Re: What did you do to your bike today?
Posted: Mon May 18, 2020 5:43 pm
Installed stainless clamps all around airbox and carbs.
Next up is oil lines and cooler
Next up is oil lines and cooler
Re: What did you do to your bike today?
Posted: Tue May 19, 2020 7:17 am
Oetiker from McMaster Carr?
Re: What did you do to your bike today?
Posted: Tue May 19, 2020 8:39 am
Bought them from randakk
Re: What did you do to your bike today?
Posted: Fri May 22, 2020 1:05 pm
Why did you changed the choke set up ? first time I see this on stock Keihin, interesting.
Re: What did you do to your bike today?
Posted: Fri May 22, 2020 1:05 pm
Why did you changed the choke set up ? first time I see this on stock Keihin, interesting.
Re: What did you do to your bike today?
Posted: Fri May 22, 2020 2:54 pm
The clamps are a great addition, as is the choke relocation.
My clutch seems to be slipping a bit, so I changed the order of the friction plates in the stack. I’ve found clutch plates don’t release in an, absolutely, uniform manner. One side of the stack usually releases with more space between the plates. It’s worked a charm doing this in the past...fingers crossed.
My clutch seems to be slipping a bit, so I changed the order of the friction plates in the stack. I’ve found clutch plates don’t release in an, absolutely, uniform manner. One side of the stack usually releases with more space between the plates. It’s worked a charm doing this in the past...fingers crossed.
Re: What did you do to your bike today?
Posted: Sun May 24, 2020 8:02 am
JP
My engine is not going to original setup. I have slip-on bars and R1 front. I am running motogadget electric als and handlebar switches are all custom . Won’t be using stock choke lever
Re: What did you do to your bike today?
Posted: Sun May 24, 2020 8:05 am
Where did you source the oil cooler brackets ? They look great. Whole bike is awesome !
Re: What did you do to your bike today?
Posted: Sun May 24, 2020 4:57 pm
Re: What did you do to your bike today?
Posted: Sun May 24, 2020 9:36 pm
Thank you for the picture. I get some idea and may be I can make a bracket for mine
Re: What did you do to your bike today?
Posted: Tue Sep 15, 2020 6:10 am
Started it after a years hiatus ...…………… 
Re: What did you do to your bike today?
Posted: Thu Nov 05, 2020 12:54 pm
Not today but last week. I fabricated a bikini fairing with an english wheel that a friend lent me. Unlike the old acrylic fairing that I used for a template it wraps all the around the light and rises an 1-2 inches higher.
It only needs to be polished and attached to the previous fairing's brackets.
Next fabrication will be a chain guard for the GS1100 swingarm.
It only needs to be polished and attached to the previous fairing's brackets.
Next fabrication will be a chain guard for the GS1100 swingarm.