EBC front rotors

Post Reply
Bamacbx
ICOA Member
ICOA Member
Posts: 1
Joined: Sat Jun 09, 2012 10:40 am
Location: Prattville AL
Location: Prattville AL

EBC front rotors

Post by Bamacbx »

Hi CBXers,
If anyone has the EBC front rotors on their 79, could you measure the thickness of the center hub? I ordered a set, but when I got them, the hubs were much thicker than the stock ones, the bolts were not long enough to go all the way through and still have any thread left to screw on the nuts. Anyone else had any issues with these working? Thanks

Brett

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4069
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: EBC front rotors

Post by steve murdoch icoa #5322 »

Welcome to the site, Brett.
Never heard of that problem with the EBC rotors.
I remember zxbob used them on his '80 resto and did not mention that particular problem.
It is a long thread but some good info.
viewtopic.php?f=6&t=6218&p=48133&hilit= ... ors#p48133

Post Reply

Return to “BRAKES: Calipers, Pads, Lines, Rotors, Upgrades & Fixes”