Where do these things go on my cbx?
-
- Forum Regular
- Posts: 34
- Joined: Mon Dec 19, 2011 4:14 pm
- Location: Denmark
- Location: Denmark
Where do these things go on my cbx?
Hi i am rebuilding a box model cbx and dont know where som parts go, can anyone tell my maybe with Pictures that would be a great help:)
Pictures would be alot of help thanks
Pictures would be alot of help thanks
You do not have the required permissions to view the files attached to this post.
-
- ICOA Technical Director
- Posts: 4755
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Where do these things go on my cbx?
The wire loop mounts to one of the front coil screws - it's to route cables through.
The bottom spacer goes between the rear top engine mount and the frame and the bolt you show is the rear starter bolt - should be a matching one for the front of the starter that the battery ground cable also attaches to. This spacer is in addition to the aluminum spool spacer.
#s 1 and 4 look like battery box grommets.
#5 is a rubber bumper that slides on a tab on top of the battery box, right over where the battery sits, in the middle. It should have some letters and numbers on it.
#6 is either 1 of 2 rubber plugs that go in the top triangle engine mounts where the crash bars bolt on, or it's the plug for the end of the rear brake spindle. Can't tell from the pic which.
#2 is a clamp half that goes on the tail light bracket.
#3 don't recognize.
Dave
The bottom spacer goes between the rear top engine mount and the frame and the bolt you show is the rear starter bolt - should be a matching one for the front of the starter that the battery ground cable also attaches to. This spacer is in addition to the aluminum spool spacer.
#s 1 and 4 look like battery box grommets.
#5 is a rubber bumper that slides on a tab on top of the battery box, right over where the battery sits, in the middle. It should have some letters and numbers on it.
#6 is either 1 of 2 rubber plugs that go in the top triangle engine mounts where the crash bars bolt on, or it's the plug for the end of the rear brake spindle. Can't tell from the pic which.
#2 is a clamp half that goes on the tail light bracket.
#3 don't recognize.
Dave
-
- ICOA Member
- Posts: 10151
- Joined: Wed Mar 05, 2003 7:55 am
- Location: North East OH, ICOA 3904
Re: Where do these things go on my cbx?
I cannot read your post or see the pictures unless I click on them, but #3 may be the sheet metal clips on the front rim of the tank, purpose of which is unknown to me.
-
- ICOA Technical Director
- Posts: 4755
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Where do these things go on my cbx?
Those clips aren't the ones for the front of the tank - I don't recognize them as any CBX part.
Dave
Dave
-
- ICOA Member
- Posts: 10151
- Joined: Wed Mar 05, 2003 7:55 am
- Location: North East OH, ICOA 3904
Re: Where do these things go on my cbx?
daves79x wrote:Those clips aren't the ones for the front of the tank - I don't recognize them as any CBX part.
Dave
I guess, you're right, Dave. They look like cable holders. They clip on sheet metal and hold on to it with the small teeth and on the other side, you can route a cable through them, holding it close to the metal. I have seen similar things on bikes inside rear fenders to feed wires to the taillight. I have no idea where something like this would be on a CBX.
-
- Forum Regular
- Posts: 75
- Joined: Sun Jun 16, 2013 8:52 am
- Location: UK, Lincolnshire
- Location: UK, Lincolnshire
Re: Where do these things go on my cbx?
Hibhf wrote:Hi i am rebuilding a box model cbx and dont know where som parts go, can anyone tell my maybe with Pictures that would be a great help:)
Pictures would be alot of help thanks
I have also started rebuilding and found the spacer in your photo which goes on the upper rear engine mount, and also could not find it on any schematic. How did you end up up installing it, I.e which way around?
Ta
-
- ICOA Technical Director
- Posts: 4755
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Where do these things go on my cbx?
The engine mount spacer is shown in section C4, page E11 of the '79-'80 parts book. It is the starter page, which the spacer also mounts to.
Dave
Dave
-
- Forum Regular
- Posts: 75
- Joined: Sun Jun 16, 2013 8:52 am
- Location: UK, Lincolnshire
- Location: UK, Lincolnshire
Re: Where do these things go on my cbx?
Great.
Many thanks Dave
Many thanks Dave