Factory Shop Manual Error

Post Reply
User avatar
akinz
Forum Regular
Forum Regular
Posts: 74
Joined: Sat Dec 24, 2011 10:23 am
Location: Ontario, Canada
Location: Ontario, Canada

Factory Shop Manual Error

Post by akinz »

Hey Guys,

Sorry I have exhausted the search engine, I know I've read it somewhere, but I want to document in my manual the correct procedure.

I remember reading somewhere that there is an error in the '79 Honda Shop Manual. Can anybody shed some light on what it is?

Thanks.
Kyle

EMS
ICOA Member
ICOA Member
Posts: 10151
Joined: Wed Mar 05, 2003 7:55 am
Location: North East OH, ICOA 3904

Re: Factory Shop Manual Error

Post by EMS »

It concerns the installation of the cams. It is only in the early manuals dated 4-78 (?) Later manuals have a corrected section. You can check the dates on the bottom of the pages.
If your manual says 79~80, you should have the corrected version. I don't have a manual here right now and can't tell you what page it is, but check the cam installation section.

User avatar
akinz
Forum Regular
Forum Regular
Posts: 74
Joined: Sat Dec 24, 2011 10:23 am
Location: Ontario, Canada
Location: Ontario, Canada

Re: Factory Shop Manual Error

Post by akinz »

Ok thanks Mike

Post Reply

Return to “X ...OTHER TECHNICAL: Won't Run, Centerstands, Chains, Fairings, Tanks, Gauges, Petcocks, Seats, Turn Signals, etc.”