Electric Horns
-
RIPPER
- Forum Regular
- Posts: 130
- Joined: Fri Mar 07, 2003 4:26 pm
- Location: NJ USA
Electric Horns
Have just installed WOLO 320-T2 electric horns 112 decibal with a 30 amp relay.Very happy with the loudness and will install a set on my CBX.Had VERY GOOD customer service fromn the company.Think WOLO for your accessory horns.
Thanks RIPPER
FREEDOM WILL NEVER BE FREE!
FREEDOM WILL NEVER BE FREE!
-
SS
- Forum Regular
- Posts: 95
- Joined: Wed Mar 05, 2003 4:37 pm
- Location: Just south of Graceland
- Contact:
Wolo Products
Rip
In a past life, the companies I worked for sold/distributed Wolo products. They were a good company to work with, the products worked well, they were priced reasonably, and they had good customer service.
Here is their web site http://www.wolo-mfg.com/ and it includes sound bytes
In a past life, the companies I worked for sold/distributed Wolo products. They were a good company to work with, the products worked well, they were priced reasonably, and they had good customer service.
Here is their web site http://www.wolo-mfg.com/ and it includes sound bytes
SS
#5671
Someone who thinks logically provides a nice contrast to the real world.
01 XL1200C 83 CB1100F 82 CBX 80 CBX
so far!!!!!!!!!!
#5671
Someone who thinks logically provides a nice contrast to the real world.
01 XL1200C 83 CB1100F 82 CBX 80 CBX
so far!!!!!!!!!!
-
BackRoadBruce
- Forum Regular
- Posts: 71
- Joined: Sun May 08, 2005 11:34 am
- Location: Florence, CO, USA
- Contact:
Nikko Horns
I just installed a set of Nikko Horns (Part # ZFD-85-12, made in Japan) sourced from JC Whitney. They fit the stock metal mounting brackets, but the stock plastic covers cannot be reused without surgery. The sound is okay, a bit louder than the stock horns. It's certainly louder than the stock horns after they have died.
I twist the throttle just to hear the six sing.
-
broook
- Power Poster
- Posts: 514
- Joined: Tue Mar 11, 2003 9:14 pm
- Location: Newfoundland
- Contact:
Re: Horn
How long did it take you to install them Rip??? About the same as your "O" ring chain. :twisted: :twisted: :twisted: :twisted:RIPPER wrote:So,I guess you should have bought Wolo's like I suggested THREE YEARS AGO!