Rubber plug
-
- Forum Regular
- Posts: 54
- Joined: Thu Jun 04, 2015 4:44 pm
- Location: Del Rey CA
- Location: Del Rey CA
Rubber plug
Hi guys can any of you tell me want is the OEM # to the rubber plug to seat the hole by the cam chain/ tensioner
-
- ICOA Member
- Posts: 4074
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: Rubber plug
This was an easy find.
http://www.cmsnl.com/honda-cbx1000z-sup ... fFtA31-I98
http://www.cmsnl.com/honda-cbx1000z-sup ... fFtA31-I98
-
- ICOA Web Post/Pix/Video Archive Mgt
- Posts: 2206
- Joined: Mon Dec 15, 2003 2:32 pm
- Location: Brighton, MI
- Location: Brighton, Mich
- Contact:
Re: Rubber plug
Go to Partzilla. Look at cam chain tensionner. I believe it is part number 8 on the part list. Approx $3.00. Will cost you $5 postage. Better than the postage from CMS.
Larry Zimmer
cbxlarry@sbcglobal.net
cbxlarry@sbcglobal.net
-
- Forum Regular
- Posts: 54
- Joined: Thu Jun 04, 2015 4:44 pm
- Location: Del Rey CA
- Location: Del Rey CA
Re: Rubber plug
Thank You All
-
- ICOA Member
- Posts: 56
- Joined: Thu Dec 25, 2014 10:06 am
- Location: Dallas, TX
- Location: Dallas, TX
Re: Rubber plug
Hi, regarding this plug, I have to replace mine since its leaking. Would Honda Bond do the job or is there any special trick to it? Also, about the tensioner bolt which is leaking, I was thinking about using blue Locktite. Is this a good way?
Thanks.
Ramón
Thanks.
Ramón
Rsuarez
1971 Triumph Daytona, 1979 Honda CBX, 1979 Ducati 900GTS, 1984 Honda 200XR, 1992 Gilera CX, 2009 KTM 990 Adventure, 2016 KTM 250 2t Six Days, 2018 BMW K1600B
1971 Triumph Daytona, 1979 Honda CBX, 1979 Ducati 900GTS, 1984 Honda 200XR, 1992 Gilera CX, 2009 KTM 990 Adventure, 2016 KTM 250 2t Six Days, 2018 BMW K1600B
-
- ICOA Member
- Posts: 702
- Joined: Sun Apr 25, 2010 8:47 am
- Location: Charleston, Illinois, USA
- Location: Charleston, Illinois, USA
Re: Rubber plug
I put a little Honda bond on plastic plug then tap it in. As far as the bolt leaking there is a oring in a groove to prevent it from leaking also.
-
- ICOA Member
- Posts: 56
- Joined: Thu Dec 25, 2014 10:06 am
- Location: Dallas, TX
- Location: Dallas, TX
Re: Rubber plug
Thanks Tevan. I did not realize there was an o'ring on that bolt. I will check if its there.
Best.
Ramon
Best.
Ramon
Rsuarez
1971 Triumph Daytona, 1979 Honda CBX, 1979 Ducati 900GTS, 1984 Honda 200XR, 1992 Gilera CX, 2009 KTM 990 Adventure, 2016 KTM 250 2t Six Days, 2018 BMW K1600B
1971 Triumph Daytona, 1979 Honda CBX, 1979 Ducati 900GTS, 1984 Honda 200XR, 1992 Gilera CX, 2009 KTM 990 Adventure, 2016 KTM 250 2t Six Days, 2018 BMW K1600B