Hi Guys
Just wanted peoples thoughts on engine vibration.
Im still running in ( about 300 miles so far)and all seems well but Ive noticed once I get to about 6,000 revs a vibration starts to tingle the bars and foot pegs at about 75-80mph in top. This isn't too bad and when Ive ventured up to the upper ranges of the rev counter the vibration stays the same and doesnt get any worse. Is this normal? its silky smooth up to 6000. The engine is very quiet and runs really well.
Best Regards
Martin
Engine Vibration
-
robsgreen
- Forum Regular
- Posts: 93
- Joined: Sun Apr 06, 2014 8:49 am
- Location: United Kingdom
- Location: United Kingdom
-
preston
- ICOA Member
- Posts: 45
- Joined: Wed Feb 17, 2010 10:53 pm
- Location: Dunnellon, Florida, USA
- Location: Dunnellon, Florida, USA
Re: Engine Vibration
Normally these CBX engines are very smooth.
If the engine has been out of the frame I'd go back and check the torque of all
the mount bolts first.
If the engine has been out of the frame I'd go back and check the torque of all
the mount bolts first.
-
robsgreen
- Forum Regular
- Posts: 93
- Joined: Sun Apr 06, 2014 8:49 am
- Location: United Kingdom
- Location: United Kingdom
Re: Engine Vibration
Ok Thanks for that, will give it a go. The vibes are not that bad and I have had the carbs balanced.
cheers
martin
cheers
martin