How good is your Japanese?


Post Reply
kbart1
ICOA Member
ICOA Member
Posts: 214
Joined: Mon Apr 18, 2011 6:16 pm
Location: burnaby Burnaby, British Columbiabritish columbia
Location: Burnaby, British Columbia

How good is your Japanese?

Post by kbart1 »

my local Honda shop has a new (older) parts guy who turned me onto this video. It is of our little and much stronger little brother. I am not sure if I know how to post a "link" as I am not the most computer literate guy but I am hoping I can get you in the right direction and someone (Nils) can maybe clean up and link this post. if you go onto youtube and search Honda rc166 documentary you should find it. it is a documentary on the rc166 and even in Japanese it is awesome.



hopefully my attempt at posting it worked.

thx
kent

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4069
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: How good is your Japanese?

Post by steve murdoch icoa #5322 »

Your link worked perfect, Kent.
Remember, practice makes perfect and i have not been practicing enough.

So many cool things in that video.
How about them weighing the #1 exhaust pipe and it coming out at 0.5 kg. Amazing.

kbart1
ICOA Member
ICOA Member
Posts: 214
Joined: Mon Apr 18, 2011 6:16 pm
Location: burnaby Burnaby, British Columbiabritish columbia
Location: Burnaby, British Columbia

Re: How good is your Japanese?

Post by kbart1 »

ya its unbelievable. I read an article on the engine and the con-rod fits on top of a credit card. they mentioned that even with todays technology the could not mimic the metallurgy on some of the original parts!

kent

Cammer
Forum Regular
Forum Regular
Posts: 27
Joined: Mon Jul 26, 2010 8:18 pm
Location: Right Here!
Location: Right Here!

Re: How good is your Japanese?

Post by Cammer »

One of if not the best, videos of the 250 six I've ever seen. Charlie

Post Reply

Return to “ENGINES: Maintenance, Performance, Parts Sources”