CARB UNKNOWN SPACER


daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4738
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Re: CARB UNKNOWN SPACER

Post by daves79x »

Guy:

Glad you are getting on the right track. That particular washer only goes on the adjuster side of the throttle plate shaft for #4 carb. I just finished a rebuild and made particular note of any others and there are none. Side note is that you don't have to take that shaft apart to separate the carbs. But you did and that's why we're talking about this. However you got them back together, they will surely work OK until you can get back to them this winter (summer?).

Dave

Post Reply

Return to “ENGINES: Maintenance, Performance, Parts Sources”