Hi all,
Can anyone supply me with details for a 72mm headgasket, I need to know availability before I strip down the motor?
regards.
Banjobill
Oversize Copper Headgasket
-
banjobill08
- Forum Regular
- Posts: 28
- Joined: Thu Jun 09, 2011 11:45 am
- Location: North Yorkshire, UK
- Location: Scarborough, UK
-
Rol
- New Member & Happy To Be Here
- Posts: 10
- Joined: Sat Feb 17, 2007 10:19 pm
- Location: Melbourne, Australia
- Location: Melbourne, Australia
Re: Oversize Copper Headgasket
G'day Banjo Bill.
I have copper head gaskets made up for my engines, by ridgecrest.com.au
In Australia, Peter has made many gaskets for my CBX's. He has a pattern on his CNC, so you just have to tell him what size holes, (72.5mm?) and what thickness and Bob's your uncle.
I recently had a 1.2 mm, 72.5 mm gasket made and it was around $100 Australian, plus postage.
Maybe worth a try if you can't get one in UK.
If you buy a copper head gasket, they are re-useable and use white threebond 1211, as a sealant.
I only browse this site every six months, but I hope that I have been of some assistance.
Regards
Rol.
I have copper head gaskets made up for my engines, by ridgecrest.com.au
In Australia, Peter has made many gaskets for my CBX's. He has a pattern on his CNC, so you just have to tell him what size holes, (72.5mm?) and what thickness and Bob's your uncle.
I recently had a 1.2 mm, 72.5 mm gasket made and it was around $100 Australian, plus postage.
Maybe worth a try if you can't get one in UK.
If you buy a copper head gasket, they are re-useable and use white threebond 1211, as a sealant.
I only browse this site every six months, but I hope that I have been of some assistance.
Regards
Rol.
-
banjobill08
- Forum Regular
- Posts: 28
- Joined: Thu Jun 09, 2011 11:45 am
- Location: North Yorkshire, UK
- Location: Scarborough, UK
Re: Oversize Copper Headgasket
Hi Rol,
That's a very useful bit of information, I will definatly gve him a ring if I can't get fixed up here..
Thanks for the reply..
Have a bonzer day..............
Banjobill
That's a very useful bit of information, I will definatly gve him a ring if I can't get fixed up here..
Thanks for the reply..
Have a bonzer day..............
Banjobill