oil filter adapter


Post Reply
LamarX
Forum Regular
Forum Regular
Posts: 37
Joined: Wed Mar 05, 2003 6:24 pm
Location: Winnipeg Manitoba

oil filter adapter

Post by LamarX »

Hi all, I'd like to buy a tap for the oil filter nipple. The oil filter bolt is 20 mm but the adapter that screws into the engine is larger. I don't know what the size is for a tap.

Part # 11209-422-000 can anyone help with the tread size, I'll guess 26mm but I'm not sure.
Thanks,

Marc Lamarche

User avatar
alimey4u2
ICOA Web Video Director
ICOA Web Video Director
Posts: 5093
Joined: Fri Aug 11, 2006 1:03 pm
Location: Uphill, WsM, United Kingdom

Post by alimey4u2 »

Mark, don't forget the reason the "adapter" is there is to have a good thread base for the frequent removal/replacement of the filter bolt ( thank you Mr Honda.) I say this just in case you are going to reconfigure the design.

As for thread size, I'm sure someone will come along with the info soon...
ICOA # 656

Post Reply

Return to “ENGINES: Maintenance, Performance, Parts Sources”