Engine stand jig

6 posts • Page 1 of 1

bdento59: Forum Regular; Posts: 230; Joined: Mon Apr 05, 2004 1:16 pm; Location: Yardley; Location: Pennsylvania, USA; Contact:
Contact bdento59

Website

Post by bdento59 » Sat Aug 30, 2008 10:22 am

Does anyone have measurements or a pattern handy to build an engine stand jig for the CB-X? TIA

Bill Denton
Yardley, PA
wkdenton@verizon.net
Lazarus Cycleworks, LLC
We Breathe New Life into Old Bikes

cbxtacy: Posting God; Posts: 2543; Joined: Sun Aug 29, 2004 4:22 am; Location: San Diego, California, USA; Location: San Diego, California, USA

Post by cbxtacy » Sat Aug 30, 2008 10:49 am

one out of four people in this country is mentally unbalanced
think of your three closest friends, if they're okay then
YOU'RE THE ONE

cbxtacy: Posting God; Posts: 2543; Joined: Sun Aug 29, 2004 4:22 am; Location: San Diego, California, USA; Location: San Diego, California, USA

Post by cbxtacy » Sat Aug 30, 2008 10:59 am

one out of four people in this country is mentally unbalanced
think of your three closest friends, if they're okay then
YOU'RE THE ONE

bdento59: Forum Regular; Posts: 230; Joined: Mon Apr 05, 2004 1:16 pm; Location: Yardley; Location: Pennsylvania, USA; Contact:
Contact bdento59

Website

Post by bdento59 » Sat Aug 30, 2008 4:03 pm

Thanks for the quick reply!

Bill Denton
Yardley, PA
wkdenton@verizon.net
Lazarus Cycleworks, LLC
We Breathe New Life into Old Bikes

cbxtacy: Posting God; Posts: 2543; Joined: Sun Aug 29, 2004 4:22 am; Location: San Diego, California, USA; Location: San Diego, California, USA

Post by cbxtacy » Sat Aug 30, 2008 5:21 pm

try my first post, the second one requires a special "jack".

one out of four people in this country is mentally unbalanced
think of your three closest friends, if they're okay then
YOU'RE THE ONE

alimey4u2: ICOA Web Video Director; Posts: 5093; Joined: Fri Aug 11, 2006 1:03 pm; Location: Uphill, WsM, United Kingdom

Post by alimey4u2 » Sat Aug 30, 2008 6:07 pm

cbxtacy wrote:try my first post, the second one requires a special "jack".

ICOA # 656

Post Reply

6 posts • Page 1 of 1