Real Oil Capacity


User avatar
cbx4evr
Power Poster
Power Poster
Posts: 329
Joined: Sat Mar 15, 2003 9:26 pm
Location: Edmonchuk, AB, Canada
Location: Edmonchuk, AB, Canada

Post by cbx4evr »

BASTOK wrote: The precedure was...:

- Unsecrew the bolt at bottom of the bike, until all the oil drain.
- Put the engine switch OFF and press start button few sec to drain more.
- Then take out the old filter and put the new one.
- Fill with new oil
- Press start button few seconds to refil
- Start the engine 2 minutes and review the oil level
- Refill only a little more.

Then I drive for 15 miles and recheck the level and was OK.

Did you notice something bad in the procedure or it's only what you said about the old oil in some parts of the engine.

Thanks! (sorry about my english ;-) )

George - BASTOK
I don't follow the steps indicated in red in the procedure. Are you turning the bike over while oil is draining/refilling?
"It's a friggen motorcycle, it's not supposed to be comfortable, quiet or safe. The wind noise is supposed to hurt your ears, the seat should be hard and riding it should make you shit your pants every now and then. "

Post Reply

Return to “ENGINES: Maintenance, Performance, Parts Sources”