Clutch lever/pull "O" ring removal


Post Reply
User avatar
cross
ICOA Member
ICOA Member
Posts: 871
Joined: Tue Jan 21, 2014 11:26 am
Location: San Diego
Location: San Diego, Ca

Clutch lever/pull "O" ring removal

Post by cross »

Hi guys,

I have a little seep of oil around the clutch lever by the clutch cover. Can this "O" ring be replaced without removing the whole clutch cover?
Second question is about the oil cooler lines. Now that i removed my carbs for cleaning i think that it would be wise to replace them as they are 37 years old. Now, Terry has steel braided ones but i prefer black nylon braided ones that look like stock.
Anyone has a source for these?


Thank you
Sasha
Sasha

'82 Honda CBX
'99 Triumph TBS
'01 Honda Valkyrie

:auto-sportbike:

User avatar
cross
ICOA Member
ICOA Member
Posts: 871
Joined: Tue Jan 21, 2014 11:26 am
Location: San Diego
Location: San Diego, Ca

Re: Clutch lever/pull "O" ring removal

Post by cross »

Well, it's obvious that clutch cover needs to come off, what was i thinking!
Sasha

'82 Honda CBX
'99 Triumph TBS
'01 Honda Valkyrie

:auto-sportbike:

User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3868
Joined: Mon Jan 25, 2010 7:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Re: Clutch lever/pull "O" ring removal

Post by NobleHops »

Tim’s will make new black braided rubber lines. You just send him your ends.
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

Post Reply

Return to “ENGINES: Maintenance, Performance, Parts Sources”