The International CBX Owners Association

I pulled the engine from my 1982 CBX Prolink and am now ready to reinstall it. Shame on me that I didn't document where the spacers go on the two long rear engine mounting bolts .

One of the long bolts is on top and goes through the frame and and the very rear part of the engine. There is a lower bolt that goes through the frame, mounting plate for the footpegs and the very rear part of the engine. There are two spacers in question. One is about 3/4" wide and the other is just over 1" wide.

My question is on what bolts do each of the spacers (3/4" or 1") go on (upper or lower) and on what side of the bike (left or right) should each of the spacers be placed? If someone would answer these questions I would very much appreciate it.

Thanks.

Left hand side, shorter on top

EZ, this might help, also: http://www.partzilla.com/parts/search/H ... parts.html The spacers you reference are number 7 and 8 in the diagram. (Called 'collar' in Honda-talk.)

That's what I needed to know. Thanks guys.