I pulled the engine from my 1982 CBX Prolink and am now ready to reinstall it. Shame on me that I didn't document where the spacers go on the two long rear engine mounting bolts .
One of the long bolts is on top and goes through the frame and and the very rear part of the engine. There is a lower bolt that goes through the frame, mounting plate for the footpegs and the very rear part of the engine. There are two spacers in question. One is about 3/4" wide and the other is just over 1" wide.
My question is on what bolts do each of the spacers (3/4" or 1") go on (upper or lower) and on what side of the bike (left or right) should each of the spacers be placed? If someone would answer these questions I would very much appreciate it.
Thanks.
Engine Mount Spacer Location
-
- Forum Regular
- Posts: 31
- Joined: Tue May 19, 2015 5:05 pm
- Location: Forest Lake, MN
- Location: Forest Lake, MN
Engine Mount Spacer Location
1982 Honda CBX
- Mello
- Forum Regular
- Posts: 239
- Joined: Sun Jan 05, 2014 9:52 am
- Location: Jhb, South Africa
- Location: Jhb, South Africa
Re: Engine Mount Spacer Location
Left hand side, shorter on top
You do not have the required permissions to view the files attached to this post.
"Aerodynamics are for people who can't build engines." - Enzo Ferrari
-
- ICOA Web Post/Pix/Video Archive Mgt
- Posts: 2196
- Joined: Mon Dec 15, 2003 2:32 pm
- Location: Brighton, MI
- Location: Brighton, Mich
- Contact:
Re: Engine Mount Spacer Location
EZ, this might help, also: http://www.partzilla.com/parts/search/H ... parts.html The spacers you reference are number 7 and 8 in the diagram. (Called 'collar' in Honda-talk.)
Larry Zimmer
cbxlarry@sbcglobal.net
cbxlarry@sbcglobal.net
-
- Forum Regular
- Posts: 31
- Joined: Tue May 19, 2015 5:05 pm
- Location: Forest Lake, MN
- Location: Forest Lake, MN