Help ID old six into six exh with removable baffles?


Help ID old six into six exh with removable baffles?

Postby hailwood1965 » Thu Jan 09, 2014 12:19 pm

Hello all

I'm new here and grateful for this resource.

I'm trying to ID an old chrome CBX six into six exhaust.

Exhaust has removable baffles, via a bolt on the side of the muffler. Pipes are all in one piece--head pipe and muffler.

Any idea on who made these exhaust? Can't find a manufacturer ID anywhere. Would also like to find a suitable replacement for the top pipe on the RHS of the bike.

Also, is that really kosher to have the axle positioned right on the muffler? Both sides are like that.

Bike is a 1979 model.

Thanks.

Hale

1a.jpg
You do not have the required permissions to view the files attached to this post.
hailwood1965
New Member & Happy To Be Here
New Member & Happy To Be Here
 
Posts: 10
Joined: Thu Jan 09, 2014 9:19 am
Location: Minnesota

Re: Help ID old six into six exh with removable baffles?

Postby NobleHops » Thu Jan 09, 2014 6:02 pm

Greetings Hale and welcome! Can't help you with your question, but more photos might help those who can.
I Do Vapor Blasting! http://www.cbxclub.com/forum/viewtopic.php?f=5&t=9881

Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

http://www.restocycle.com Ikon shocks for your CBX! https://www.ikonshocksusa.com/collections/honda/honda-cbx1000-79-80
User avatar
NobleHops
ICOA Member
ICOA Member
 
Posts: 3058
Images: 28
Joined: Mon Jan 25, 2010 8:17 am
Location: Tucson, Arizona, USA

Re: Help ID old six into six exh with removable baffles?

Postby EMS » Thu Jan 09, 2014 8:46 pm

Welcome Hale! Denco used to make a 6 into 6, but I cannot tell from your picture if this is one. A side view would be more helpful. One thing I can probably tell is, that the contact between the rear axle and the exhaust is not something you would want. The axle moves up and down with the rear suspension and will do some serious harm to the exhaust...however.. I am not sure if that matters anymore...

Here is a picture of a set of Dencos from a different thread. Looks like them.

5822
To be understood is the exception
To be misunderstood is the rule.
User avatar
EMS
ICOA Member
ICOA Member
 
Posts: 9358
Images: 1707
Joined: Wed Mar 05, 2003 8:55 am
Location: North East OH, ICOA 3904

Re: Help ID old six into six exh with removable baffles?

Postby steve murdoch icoa #5322 » Thu Jan 09, 2014 9:35 pm

The stacking of the mufflers and the baffles look like the Denco set that i had but they were a two piece pipe.
The mufflers were VERY close to the axle bolt but some persuasion moved the mounting tabs.

It will be tough to find a replacement muffler. You might try your local car muffler shop.

I can't think of a one piece. Maybe the old G.P. systems from Tims? Powerflow from South Africa?

btw, welcome to the site.
steve murdoch icoa #5322
ICOA Member
ICOA Member
 
Posts: 3219
Images: 19
Joined: Tue Mar 04, 2003 10:12 am
Location: St. Catharines, On. Canada

Re: Help ID old six into six exh with removable baffles?

Postby hailwood1965 » Thu Jan 09, 2014 10:54 pm

Thanks everyone.

Looks like they are Denco exhaust pipes.

Too bad, I was looking forward to hearing what a 1000cc six into six exhaust might sound like.
hailwood1965
New Member & Happy To Be Here
New Member & Happy To Be Here
 
Posts: 10
Joined: Thu Jan 09, 2014 9:19 am
Location: Minnesota

Re: Help ID old six into six exh with removable baffles?

Postby NobleHops » Fri Jan 10, 2014 12:35 am

It sounds awesome. Lemme go get you a link...

Presto

I Do Vapor Blasting! http://www.cbxclub.com/forum/viewtopic.php?f=5&t=9881

Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

http://www.restocycle.com Ikon shocks for your CBX! https://www.ikonshocksusa.com/collections/honda/honda-cbx1000-79-80
User avatar
NobleHops
ICOA Member
ICOA Member
 
Posts: 3058
Images: 28
Joined: Mon Jan 25, 2010 8:17 am
Location: Tucson, Arizona, USA

Re: Help ID old six into six exh with removable baffles?

Postby steve murdoch icoa #5322 » Fri Jan 10, 2014 9:02 am

An old clip from CBXtacy with Denco pipes.
George is such a hooligan.
http://www.flickr.com/photos/13481782@N06/2800730231/
steve murdoch icoa #5322
ICOA Member
ICOA Member
 
Posts: 3219
Images: 19
Joined: Tue Mar 04, 2003 10:12 am
Location: St. Catharines, On. Canada


Return to EXHAUSTS: What works and fits...and what doesn't.

Who is online

Users browsing this forum: akinz and 1 guest